WTB S4 N/A parts

Breckboarder55 · 04-08-2010, 07:09 PM

I am in the middle of resurrection my S4 N/A after a FPD related fire and am in need of the following parts:

-2 460cc injectors

-Wiring harness for a N326 - 1986 to 1987.5 13B 6PI ECU (a complete and functional)

-UIM, and LIM. With good condition aux port actuators, throttle body, exc.

-Good or new conditioned FPD

-2 S4 driver side door handles.

Let me know,
Adam

Mazdaracer4fun · 04-09-2010, 11:42 AM

hey there...

-2 460cc injectors (what year car do you have? this matters as 86-87 are low ohm and 88 are high ohm injectors) (dont have these)

-Wiring harness for a N326 - 1986 to 1987.5 13B 6PI ECU (again year matters please)
(75$ +shipping)

-UIM, and LIM. With good condition aux port actuators, throttle body, exc. (auto or manual?) (i have an uim and lim, and throttle body for a manual car)
($75 +shipping)

-Good or new conditioned FPD FPD? Fuel Pulsation Dampener? if so i have this for s4
($10) shipped with parts above or + shipping if by self

Breckboarder55 · 04-09-2010, 12:21 PM

Quote:

Originally Posted by Mazdaracer4fun

hey there...

-2 460cc injectors (what year car do you have? this matters as 86-87 are low ohm and 88 are high ohm injectors) (dont have these)

-Wiring harness for a N326 - 1986 to 1987.5 13B 6PI ECU (again year matters please)
(75$ +shipping)

-UIM, and LIM. With good condition aux port actuators, throttle body, exc. (auto or manual?) (i have an uim and lim, and throttle body for a manual car)
($75 +shipping)

-Good or new conditioned FPD FPD? Fuel Pulsation Dampener? if so i have this for s4
($10) shipped with parts above or + shipping if by self

Yes low ohm for an 87. It is for a manual car.

I'm interested in the harness and the manifolds. I think I remember reading S5 Pulsation Dampeners didnt have the same issues as S4s.

vex · 04-09-2010, 04:08 PM

See my sig as i have a load of parts willing to let go for cheap

Mazdaracer4fun · 04-17-2010, 12:08 PM

i overcounted the manifolds,

i have harness $75
uim no throttlebody $40
+15 for shipping

Breckboarder55 · 05-13-2010, 08:50 PM

I still need parts, i sent PMs.

Bump

Breckboarder55 · 05-25-2010, 12:47 AM

still need parts... BUMP

vex · 05-25-2010, 11:19 AM

I may still have my old FPD... I'd have to check.

Breckboarder55 · 09-21-2010, 10:20 AM

I have put this off way too long and really need to pick up a good condition wiring harness ASAP.

-Wiring harness for a N326 - 1986 to 1987.5 13B 6PI ECU (a complete and functional)

Thanks.

04-08-2010, 07:09 PM	#1
Breckboarder55 The Newbie Join Date: Mar 2010 Posts: 10 Rep Power: 0	WTB S4 N/A parts I am in the middle of resurrection my S4 N/A after a FPD related fire and am in need of the following parts: -2 460cc injectors -Wiring harness for a N326 - 1986 to 1987.5 13B 6PI ECU (a complete and functional) -UIM, and LIM. With good condition aux port actuators, throttle body, exc. -Good or new conditioned FPD -2 S4 driver side door handles. Let me know, Adam __________________ 1955 Dodge Royal Lancer: (waiting for restoration) 1987 RX7 T2: Haltech, lots of fuel, 62-1, exc 1999 Wrangler: 33" M/T, skids, 3.5" lift,exc 1987 Mazda RX-7 Base: resurrecting from dead

04-09-2010, 04:08 PM	#4
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	See my sig as i have a load of parts willing to let go for cheap __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

05-13-2010, 08:50 PM	#6
Breckboarder55 The Newbie Join Date: Mar 2010 Posts: 10 Rep Power: 0	I still need parts, i sent PMs. Bump __________________ 1955 Dodge Royal Lancer: (waiting for restoration) 1987 RX7 T2: Haltech, lots of fuel, 62-1, exc 1999 Wrangler: 33" M/T, skids, 3.5" lift,exc 1987 Mazda RX-7 Base: resurrecting from dead

05-25-2010, 12:47 AM	#7
Breckboarder55 The Newbie Join Date: Mar 2010 Posts: 10 Rep Power: 0	still need parts... BUMP __________________ 1955 Dodge Royal Lancer: (waiting for restoration) 1987 RX7 T2: Haltech, lots of fuel, 62-1, exc 1999 Wrangler: 33" M/T, skids, 3.5" lift,exc 1987 Mazda RX-7 Base: resurrecting from dead

05-25-2010, 11:19 AM	#8
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	I may still have my old FPD... I'd have to check. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

04-09-2010, 11:42 AM	#2
Mazdaracer4fun S4 INTO S5 Turbo II OWNER Join Date: Dec 2008 Location: Parma, Ohio 44130 Posts: 70 Rep Power: 17	hey there... -2 460cc injectors (what year car do you have? this matters as 86-87 are low ohm and 88 are high ohm injectors) (dont have these) -Wiring harness for a N326 - 1986 to 1987.5 13B 6PI ECU (again year matters please) (75$ +shipping) -UIM, and LIM. With good condition aux port actuators, throttle body, exc. (auto or manual?) (i have an uim and lim, and throttle body for a manual car) ($75 +shipping) -Good or new conditioned FPD FPD? Fuel Pulsation Dampener? if so i have this for s4 ($10) shipped with parts above or + shipping if by self

04-17-2010, 12:08 PM	#5
Mazdaracer4fun S4 INTO S5 Turbo II OWNER Join Date: Dec 2008 Location: Parma, Ohio 44130 Posts: 70 Rep Power: 17	i overcounted the manifolds, i have harness $75 uim no throttlebody $40 +15 for shipping

09-21-2010, 10:20 AM	#9
Breckboarder55 The Newbie Join Date: Mar 2010 Posts: 10 Rep Power: 0	I have put this off way too long and really need to pick up a good condition wiring harness ASAP. -Wiring harness for a N326 - 1986 to 1987.5 13B 6PI ECU (a complete and functional) Thanks. __________________ 1955 Dodge Royal Lancer: (waiting for restoration) 1987 RX7 T2: Haltech, lots of fuel, 62-1, exc 1999 Wrangler: 33" M/T, skids, 3.5" lift,exc 1987 Mazda RX-7 Base: resurrecting from dead