Twin Pump Assembly Sale Thread

phunk · 04-01-2008, 11:12 AM

walbro units have shipped (with exception of one or two, waiting for more of the bulkhead fittings to arrive probably tomorrow), bosch ones are undergoing final comparisons of measurements to double check that they fit correctly now and are leaving probably tomorrow when the restock of bulkhead fittings arrive.

phunk · 04-01-2008, 05:56 PM

ok, there is more going on with the bosch assembly then we thought. Here is a copy of the email sent to everyone who has ever purchased a Bosch assembly.

=======

There has been recent fitment issues found with the current bosch assembly.

The dual pump bracket was initially designed around walbro pumps. By a customers request we machined some Bosch brackets for the existing kit. We thought we had confirmation of fitment, but it turns out that we had a misunderstanding.

The bosch version of our twin pump assembly is undergoing a few minor changes for proper clearance and fitment in the tank.

Anyone who has this assembly already may either send it in to us for swapping out the adjusted bracketry parts, or can request us to simply ship them the revised components to bolt to the top plate.

Those of you currently waiting for this assembly, shipping will be delayed until as long as the 14th of April, but hopefully sooner. In attempt to provide the best customer service we can, we are offering 3 options for you valued customers.

1: Refund on the order

2: Switch order to Walbro bracket

3: Wait it out until the 14th

If you wish to take option 1 or 2, please reply to this email and let me know. Otherwise we will assume you don't mind waiting up to the 14th.
================

To you walbro guys, you probably already got your tracking # from us via email. No issues with the walbro units, we have been running it for a while now and so have other people.

Basically the Bosch assemblys need to have the pumps scoot over a bit, and the mounting rods shortened.

This time we are going to test fit it ourselves to get it perfect like we did with the walbro kit.

13bmaniac · 04-09-2008, 10:20 AM

any news or udpates for the bosh units????

thanks

04-01-2008, 11:12 AM	#1
phunk The Newbie Join Date: Mar 2008 Posts: 23 Rep Power: 0	walbro units have shipped (with exception of one or two, waiting for more of the bulkhead fittings to arrive probably tomorrow), bosch ones are undergoing final comparisons of measurements to double check that they fit correctly now and are leaving probably tomorrow when the restock of bulkhead fittings arrive.

04-01-2008, 05:56 PM	#2
phunk The Newbie Join Date: Mar 2008 Posts: 23 Rep Power: 0	ok, there is more going on with the bosch assembly then we thought. Here is a copy of the email sent to everyone who has ever purchased a Bosch assembly. ======= There has been recent fitment issues found with the current bosch assembly. The dual pump bracket was initially designed around walbro pumps. By a customers request we machined some Bosch brackets for the existing kit. We thought we had confirmation of fitment, but it turns out that we had a misunderstanding. The bosch version of our twin pump assembly is undergoing a few minor changes for proper clearance and fitment in the tank. Anyone who has this assembly already may either send it in to us for swapping out the adjusted bracketry parts, or can request us to simply ship them the revised components to bolt to the top plate. Those of you currently waiting for this assembly, shipping will be delayed until as long as the 14th of April, but hopefully sooner. In attempt to provide the best customer service we can, we are offering 3 options for you valued customers. 1: Refund on the order 2: Switch order to Walbro bracket 3: Wait it out until the 14th If you wish to take option 1 or 2, please reply to this email and let me know. Otherwise we will assume you don't mind waiting up to the 14th. ================ To you walbro guys, you probably already got your tracking # from us via email. No issues with the walbro units, we have been running it for a while now and so have other people. Basically the Bosch assemblys need to have the pumps scoot over a bit, and the mounting rods shortened. This time we are going to test fit it ourselves to get it perfect like we did with the walbro kit.

04-09-2008, 10:20 AM	#3
13bmaniac Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	any news or udpates for the bosh units???? thanks