Joff and MrsJoff's Chaste White BorgWarner FD build

MrsJoff · 10-13-2010, 11:06 AM

It is all done (maybe)

Some stages through the process

After the 7th and final coat of resin

After 4 hours of course sanding

After another 4 hours of wet sanding to make it shiny and pretty. Up against the SMIC.

In place in the engine bay

Jesse is not totally satisfied with the outcome. He may apply more coats of resin and start the sanding process all over again to make the shine a little deeper. Either way, he put a lot of hard work into it and it looks amazing.

10-13-2010, 11:06 AM	#1
MrsJoff Rotary Fan in Training Join Date: Sep 2008 Location: NE Mesa, AZ Posts: 46 Rep Power: 0	It is all done (maybe) Some stages through the process After the 7th and final coat of resin After 4 hours of course sanding After another 4 hours of wet sanding to make it shiny and pretty. Up against the SMIC. In place in the engine bay Jesse is not totally satisfied with the outcome. He may apply more coats of resin and start the sanding process all over again to make the shine a little deeper. Either way, he put a lot of hard work into it and it looks amazing.