|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
10-27-2010, 09:05 AM
|
#3 |
|
I've been Wankeled!
Join Date: Apr 2010
Location: Mildmay, Ontario, Canada
Posts: 260
Rep Power: 16  |
+1 FC clutch master cylinders suck. I've had 2 fail on me in the past and the one in my Rx-4 as well. That will be the cause of the problem. Also replace the slave cylinder too incase any debris from the clutch master got into it. Check your flex hose as well. All of these parts are now old and the rubber just fails.
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
|
|
| Bookmarks |
|
|
Threaded Mode