Electrical connectors - t-stat housing

C. Ludwig · 11-16-2010, 11:01 AM

For anyone that wants to use Deustch connectors, but doesn't want to spend a months rent on crimpers, these work well for all the DT, DTM, and DTP connectors.

http://cgi.ebay.com/ebaymotors/D-sub...motiveQ5fTools

Those crimpers work for the Deustch solid contacts that looks like this.

An alternative is to use the stamped form contacts with an inexpensive W crimper, like is used to crimp Weatherpack terminals.

A good source for the Deustch components and other harness materials is www.prowireusa.com

11-16-2010, 11:01 AM	#1
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN Posts: 494 Rep Power: 18	For anyone that wants to use Deustch connectors, but doesn't want to spend a months rent on crimpers, these work well for all the DT, DTM, and DTP connectors. http://cgi.ebay.com/ebaymotors/D-sub...motiveQ5fTools Those crimpers work for the Deustch solid contacts that looks like this. An alternative is to use the stamped form contacts with an inexpensive W crimper, like is used to crimp Weatherpack terminals. A good source for the Deustch components and other harness materials is www.prowireusa.com __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI Last edited by C. Ludwig; 11-16-2010 at 11:04 AM.