|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
FC3S
Join Date: Jun 2010
Location: Townsville, QLD, AUS
Posts: 326
Rep Power: 16 ![]() |
Handskills? Did you try the vacum cleaner idea of mine? I got a part of a zip tie out of mine by that.
|
![]() |
![]() |
![]() |
#2 |
Lifetime Rotorhead
Join Date: Apr 2010
Location: Elkton, MD
Posts: 874
Rep Power: 16 ![]() |
+1... I suggested a shop vac many posts ago as well. I can vouch for the fact it works - saved my a$$ in a similar situation - dropped one of the fuel rail bolts in the LIM once and the shop vac sucked it right up.
|
![]() |
![]() |
![]() |
#3 |
Rotary Fan in Training
Join Date: Oct 2010
Location: Ann Arbor, Mi
Posts: 47
Rep Power: 0 ![]() |
I got it out! I had to remove both 5/6 port actuators and then the LIM but I got it out!
Very lucky I was. The runner had 'chuted' the washer so it traveled at the port horizontally. The port necked down enough that the washer wedged horizontally in the port, so it never actually entered the block. Whew! So now I just have to reassemble the lower intake tract, finish replacing the oil injection lines, pressure test the fuel system, and reassemble the whole shebang. Peace, and thanks for the support!
__________________
1990 Mazda RX-7 NA; Lucy, after the main antagonist from Elfin Lied. Eventual plans? Something cyberpunk and spicy. |
![]() |
![]() |
![]() |
Bookmarks |
|
|