|
20B/3 Rotor Conversion.. All things to do with 20B/3 rotor... Post pics, video, tech, etc.. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
20B
Join Date: Jul 2009
Location: Regina , Saskatchewan , Canada
Posts: 88
Rep Power: 16 ![]() |
?? Any Recommendations on two stroke oil ??
Any Recommendations as to what Brand and ratio of two stroke oil to use in my 20B
|
![]() |
![]() |
![]() |
#2 |
Rotary Fan in Training
Join Date: Jul 2010
Posts: 36
Rep Power: 0 ![]() |
Mazdatrix Store
Mazdatrix sells Idemitsu premix oil for rotaries, I believe its 1 ounce per gallon of gas for track purposes, but you can always check the bottle label. My friend premixed this oil in his 13b making around 300hp and his engine is still fine after two full drift seasons. http://mazdatrix.com/q-supply.htm
__________________
'91 FC3s |
![]() |
![]() |
![]() |
#3 | |
20B
Join Date: Jul 2009
Location: Regina , Saskatchewan , Canada
Posts: 88
Rep Power: 16 ![]() |
Thanks
Quote:
|
|
![]() |
![]() |
![]() |
#4 |
Test Whore - Admin
Join Date: Mar 2008
Location: Right Behind you son
Posts: 4,581
Rep Power: 10 ![]() |
Good stuff, that's what I use. Ratio is 1/2 oz/gal of gas
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
![]() |
![]() |
![]() |
#5 |
ORD - Old Rotary Dude
Join Date: Feb 2008
Location: Pelham, AL
Posts: 319
Rep Power: 18 ![]() |
I have always used Maxima Castor 927 premix and have great success with anything from my daily drivers to full bridge ports running nitrous. You can find this stuff at most motorcycle shops that sell dirt bike supplies.
I have a case of Indemitsu that I will be switching to (at least to try) after I finish with my current bottle of Maxima. I have always used a ration of 3.5 ounces per 5 gallons. Been running this ration/combination since the early 90s and never had a failure. |
![]() |
![]() |
![]() |
#6 |
20b FD
Join Date: Apr 2008
Posts: 105
Rep Power: 18 ![]() |
I run 1 oz/gal of Idemitsu in my 20b....Maybe running too much??????
__________________
Bobby '93 20b RX-7 |
![]() |
![]() |
![]() |
#7 |
Rotary Masochist
Join Date: May 2008
Location: Floyds Knobs, IN
Posts: 494
Rep Power: 18 ![]() |
FWIW, got up close and personal in Jim Downing and Dennis Spencer's pit at The Mitty a few years ago and saw that they were using Yamalube R. Known as good stuff in my two-stroke days, but it surprised me to see these legends using it.
__________________
_______________________________________________ One stop Haltech, AEM, Syvecs shopping. Installation and tuning. http://www.lms-efi.com Free support. Drop us an email. chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI |
![]() |
![]() |
![]() |
#8 |
Rotary parts manufacture
Join Date: Sep 2010
Location: Stony point NY
Posts: 170
Rep Power: 15 ![]() |
The Castrol oils are a good inexpensive solution.
We use it all the time..Some of our customers use aprox 1-2oz to one gallon ratios and the big boy drag guys will mix one quart per 5 gallons. Yes i know..they will smoke at that amount but with some of the fuels they use like alcohol, methanol and e85 which are corrosive they keep the apex seals and housing chrome nicely lubricated. |
![]() |
![]() |
![]() |
#9 |
Rotary Fan in Training
Join Date: Jul 2010
Posts: 36
Rep Power: 0 ![]() |
Glad I could help
__________________
'91 FC3s |
![]() |
![]() |
![]() |
Bookmarks |
|
|