Goopy Performance resurfaced rotor housings,THEY WORK!!!

Judge Ito · 12-17-2010, 05:27 PM

Quote:

Originally Posted by 2gslse

Impressive would like more info as well

i'll have jon come and shed some info. on this. over all it's a homerun.

Ian · 12-17-2010, 07:57 PM

So this process will not get rid of the corner seal wear from the three piece seals? I have a few housings that have this wear. More or less the chrome is flake right off..

Judge Ito · 12-18-2010, 10:06 AM

Quote:

Originally Posted by Ian

So this process will not get rid of the corner seal wear from the three piece seals? I have a few housings that have this wear. More or less the chrome is flake right off..

no it will not, but if you decided to use rotor housings in that condition(many of us have) including myself. this type of work will only make those type of housings seal better. that's why i say, it's a homerun. you can't loose. the better the housing, the better the result, but a better rotor housing will come out of this resurface even if it's flaked.

this is a video of my kid's turbo II. her daily driver. this engine had rotor housings with flaked edges. Jon did the resurface for me. 3 years later engine(ported) pulls 12inches of vacuum and run's 13's all day on a stock turbo, stock ecu, ect,ect.

http://s254.photobucket.com/albums/h...Picture017.flv

Judge Ito · 12-18-2010, 10:09 AM

engine@ idle.. 750 Rpm's 12 inches of vacuum on a decently large streeport..

http://s254.photobucket.com/albums/h...Picture012.flv

Judge Ito · 12-18-2010, 10:11 AM

picture of the actual streetport on my kid's turboII.. and need I say she drives her turbo II like a MAD women every single day.

12-17-2010, 07:57 PM	#2
Ian REIAN Join Date: Feb 2008 Posts: 112 Rep Power: 18	So this process will not get rid of the corner seal wear from the three piece seals? I have a few housings that have this wear. More or less the chrome is flake right off.. __________________ 1989 Turbo II. Track Car 1988 10thAE. Garage Queen 400+rwhp

12-18-2010, 10:09 AM	#4
Judge Ito Porting Master Join Date: Mar 2009 Location: North Jersey, USA Posts: 154 Rep Power: 17	engine@ idle.. 750 Rpm's 12 inches of vacuum on a decently large streeport.. http://s254.photobucket.com/albums/h...Picture012.flv

12-18-2010, 10:11 AM	#5
Judge Ito Porting Master Join Date: Mar 2009 Location: North Jersey, USA Posts: 154 Rep Power: 17	picture of the actual streetport on my kid's turboII.. and need I say she drives her turbo II like a MAD women every single day.