Joff and MrsJoff's Chaste White BorgWarner FD build

***TitaniumTT*** · 01-06-2011, 09:40 AM

Another way to do it would be to soak a towel in acetone and pull it through with a line. Has always worked well for me.

I've thought about extrude honing the manifolds, but can't really justify the near $700

joff · 01-06-2011, 10:51 AM

Quote:

Originally Posted by TitaniumTT

Another way to do it would be to soak a towel in acetone and pull it through with a line. Has always worked well for me.

Yep, I was doing exactly that with the shop towels. The acetone just was not cutting it as a solvent. I must have pulled about 5 towels through that way and each time the rags were coming out dirty from the PCV gunk. Whatever is in that brake cleaner is some strong stuff.

Quote:

Originally Posted by TitaniumTT

I've thought about extrude honing the manifolds, but can't really justify the near $700

I wondered how expensive that would be. I would think there would be a lot to gain by simply polishing the inside passageways to get rid of the casting texture, but I didn't see an easy way get a sander in there.

One thing about that UIM is that even after porting it, pulling stuffed towels through it it definitely seems the biggest constriction is right at the UIM exit as thats when I had to use the most pulling force. I'll bet that since using the Xcessive LIM, this spot is the 2nd most constrictive point after the engine ports themselves.

01-06-2011, 09:40 AM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Another way to do it would be to soak a towel in acetone and pull it through with a line. Has always worked well for me. I've thought about extrude honing the manifolds, but can't really justify the near $700 __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**