Renesis questions

NoDOHC · 01-13-2011, 11:34 AM

It is a cool idea... I think it would be simpler to use the stock ECU and harness and then use the stock throttle sensor and throttle body.

Other options would require custom fabrication.

You should research the Renesis intake system, there are two VDI valves and the 6-PI.

If it were me, I think I would leave the ports alone and clean up rough edges. I never saw any conclusive proof that porting a renesis helped the power significantly over what a stock-port with a better fuel tune can do.

01-13-2011, 11:34 AM	#4
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	It is a cool idea... I think it would be simpler to use the stock ECU and harness and then use the stock throttle sensor and throttle body. Other options would require custom fabrication. You should research the Renesis intake system, there are two VDI valves and the 6-PI. If it were me, I think I would leave the ports alone and clean up rough edges. I never saw any conclusive proof that porting a renesis helped the power significantly over what a stock-port with a better fuel tune can do. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)