|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
|
Thread Tools | Display Modes |
|
|
01-16-2011, 08:11 AM
|
#1 |
|
Lifetime Rotorhead
Join Date: Apr 2010
Location: Elkton, MD
Posts: 874
Rep Power: 16  |
Sounds like the solder joints to the connectors on the CPU board are causing the open circuit. Just like the HVAC/logicon/clock & idiot light cluster on FCs, the solder joints like to crap out on these too. If you're handy with a soldering iron, pull out the CPU, open it up and re-do all the solder joints where the connectors join the circuit board. Pop it back in and see if it solves your problem.
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
