|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
Thread Tools | Display Modes |
![]() |
#4 |
Rotary Fan in Training
Join Date: Oct 2010
Location: Ann Arbor, Mi
Posts: 47
Rep Power: 0 ![]() |
Update:
Was able to do a bit more disassembly. Found that the exhaust manifold nuts were above the heatshield...after breaking the heads off the top two bolts. At least I can now ground it proper and get some fuel economy back! -That aside I removed both manifold injectors and spritzed some brake cleaner through the vac nipple, injector orifice, and the banjo bolt orifices. Did the blow/suck test and one I could both blow and suck through the vac nipple, the other would blow through and allow a little air to suck through. Haven't tested the housing injectors, but it seems that only one of the four injectors is actually working. -Now, could it be a loss of vacuum? Perhaps the hose that plugs into the intake snorkel isn't sealing? Or do I have three bad injectors? (If the latter, then f***-it, I'm buying a container to pemix 2-stroke oil until I rebuild/swap the engine).
__________________
1990 Mazda RX-7 NA; Lucy, after the main antagonist from Elfin Lied. Eventual plans? Something cyberpunk and spicy. |
![]() |
![]() |
Bookmarks |
|
|