New project: 1976 Cosmo RX-5 - Page 3

djmtsu · 01-11-2011, 11:55 AM

Thanks man.

The plan right now is:
-body work and paint
-FB spindle swap with RE-Speed Big Brake kit
-rebuild rear axle bearings and seals
-4x120 to 5x114.3 rear wheel adapters
-new seats, re-dye interior carpet black
-stereo install
-some 15" wheels (can't decide what I want)

Once I find out the condition of the engine, I can go from there with it.
If the 12a in it is good:
-Weber/Holley or some other carb conversion
-emissions delete
-bigger radiator
-e-fan
-FD alternator upgrade

It already has an RB Road Race header on it.

If the motor is bad, well, I will put in whatever I can find!

djmtsu · 01-21-2011, 10:27 AM

This weekend I am going to try to fire it up. I am crossing my fingers.

There has not been much progress so far. I am getting that Z3 ready to sell, which is paramount since it is providing the budget for the Cosmo.

-xlr8planet- · 01-21-2011, 12:21 PM

good luck dude, try to make a video if it starts

***TitaniumTT*** · 01-21-2011, 12:23 PM

Rotary swapped Z3?

djmtsu · 01-21-2011, 12:31 PM

Quote:

Originally Posted by TitaniumTT

Rotary swapped Z3?

Lol, you're the second person to suggest that!

No, I picked this up from a friend for an insanely low price. It was a toy he has had for years, and never really used. The slave cylinder went out, and I was going to fix it for him. Well, he asked if I just wanted to buy it, so there it is. It is going to be sold to a co-worker's brother for a healthy profit.

But, if anyone is interested, it is a 2001 Z3 3.0 with 60K.

PS- If it were to be rotary swapped, it would have to be a 20b. There is a massive amount of room under the hood.

djmtsu · 01-28-2011, 11:34 AM

Well, I picked up some vert wheels. So I guess I have to convert to 5 lug now

Two thumbs up for a $100 part requiring several hundreds of dollars to make it work. Sounds like a rotary!

fire85gslse · 01-29-2011, 07:18 AM

Good luck with that project. Very hard to find parts for her.

djmtsu · 01-29-2011, 09:02 AM

That is hat people keep saying, yet I found all the missing parts I need in a week.

Funny thing is, when you find one, people start coming out of the woodwork with parts available, and even whole cars. So it hasn't been difficult at all.

And since it isn't being restored to original, it doesn't matter anyway.

djmtsu · 01-29-2011, 05:27 PM

Tore the engine bay down today. I never bothered to check, just took the sellers word for it, but he was apparently ignorant.

She is still rocking the 13B 4 port!

It is currently stripped down to the block, have some MMO in the housings. It wouldn't budge, and I didn't want to force it to turn over. The oil looks good, and the coolant looked excellent. The plugs were a little oil fouled. I will put up some pics tomorrow.

fire85gslse · 01-30-2011, 10:51 AM

sweet

rdgt99 · 01-30-2011, 11:30 AM

What a good surprise! Can't wait to see how this turns out.

djmtsu · 01-31-2011, 01:17 PM

Question of the day:
Weber 45 DCOE or Dellorto 48?

Missed a deal on a Dellorto, 45 DCOE's are everywhere for a good price.

Also, swapping in an FB 3rd member is going to be more of a challenge than anticipated. The springs ride on the LCA's, instead of the axle tube. Also it has a panhard bar instead of a watt's linkage. Charles wants to strip the axle and transfer all the brackets to the FB axle tube. I guess there is no other way.

Measure twice, weld once I guess

ChaserAero · 01-31-2011, 02:59 PM

Mmmmm...this is gonna be fresh.

rx71king · 01-31-2011, 03:58 PM

what a rare car ..... vary cool......good luck...

djmtsu · 01-31-2011, 04:43 PM

Just picked up a Weber 45 DCOE with RB upper manifold. Need to either find a 13B 4 port lower, or just buy one new.

Now I need to get a fuel pump an regulator for this carb. Next purchase will be some essentials, most of which I can get from work, like a water pump, wires, coils, distributor cap and rotor, fuel and oil filters.

Next will be an aluminum radiator, and see if I still have my Escort E-fan. I also need an FC alternator, although I think Charles still has my old one. Once the engine is running, the chassis work begins. Then the body work/paint, and last interior.

01-11-2011, 11:55 AM	#31
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Thanks man. The plan right now is: -body work and paint -FB spindle swap with RE-Speed Big Brake kit -rebuild rear axle bearings and seals -4x120 to 5x114.3 rear wheel adapters -new seats, re-dye interior carpet black -stereo install -some 15" wheels (can't decide what I want) Once I find out the condition of the engine, I can go from there with it. If the 12a in it is good: -Weber/Holley or some other carb conversion -emissions delete -bigger radiator -e-fan -FD alternator upgrade It already has an RB Road Race header on it. If the motor is bad, well, I will put in whatever I can find! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-21-2011, 10:27 AM	#32
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	This weekend I am going to try to fire it up. I am crossing my fingers. There has not been much progress so far. I am getting that Z3 ready to sell, which is paramount since it is providing the budget for the Cosmo. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-21-2011, 12:21 PM	#33
-xlr8planet- RCC Contributor Join Date: Feb 2008 Location: Buenos Aires, Argentina Posts: 679 Rep Power: 18	good luck dude, try to make a video if it starts __________________ www.rx7club.com.ar RX-7 Forum in Spanish I make custom decals. Yes, you can ask me

01-21-2011, 12:23 PM	#34
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Rotary swapped Z3? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-28-2011, 11:34 AM	#36
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Well, I picked up some vert wheels. So I guess I have to convert to 5 lug now Two thumbs up for a $100 part requiring several hundreds of dollars to make it work. Sounds like a rotary! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-29-2011, 07:18 AM	#37
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN Posts: 1,029 Rep Power: 19	Good luck with that project. Very hard to find parts for her. __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

01-29-2011, 09:02 AM	#38
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	That is hat people keep saying, yet I found all the missing parts I need in a week. Funny thing is, when you find one, people start coming out of the woodwork with parts available, and even whole cars. So it hasn't been difficult at all. And since it isn't being restored to original, it doesn't matter anyway. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-29-2011, 05:27 PM	#39
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Tore the engine bay down today. I never bothered to check, just took the sellers word for it, but he was apparently ignorant. She is still rocking the 13B 4 port! It is currently stripped down to the block, have some MMO in the housings. It wouldn't budge, and I didn't want to force it to turn over. The oil looks good, and the coolant looked excellent. The plugs were a little oil fouled. I will put up some pics tomorrow. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-30-2011, 10:51 AM	#40
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN Posts: 1,029 Rep Power: 19	sweet __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

01-30-2011, 11:30 AM	#41
rdgt99 Rotary Fan in Training Join Date: Mar 2010 Location: ATL Posts: 41 Rep Power: 0	What a good surprise! Can't wait to see how this turns out. __________________ Rodney

01-31-2011, 01:17 PM	#42
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Question of the day: Weber 45 DCOE or Dellorto 48? Missed a deal on a Dellorto, 45 DCOE's are everywhere for a good price. Also, swapping in an FB 3rd member is going to be more of a challenge than anticipated. The springs ride on the LCA's, instead of the axle tube. Also it has a panhard bar instead of a watt's linkage. Charles wants to strip the axle and transfer all the brackets to the FB axle tube. I guess there is no other way. Measure twice, weld once I guess __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-31-2011, 02:59 PM	#43
ChaserAero www.aerokits.net Join Date: Mar 2010 Posts: 33 Rep Power: 0	Mmmmm...this is gonna be fresh. __________________ Chaser Aerodynamics, LLC Please visit our website!! Use coupon code: JB1013 to save 10% on your web order! (866) 360-KITS (5487) ext: 107

01-31-2011, 03:58 PM	#44
rx71king Rotary Fanatic Join Date: Jul 2009 Location: queens ny Posts: 117 Rep Power: 17	what a rare car ..... vary cool......good luck...

01-31-2011, 04:43 PM	#45
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Just picked up a Weber 45 DCOE with RB upper manifold. Need to either find a 13B 4 port lower, or just buy one new. Now I need to get a fuel pump an regulator for this carb. Next purchase will be some essentials, most of which I can get from work, like a water pump, wires, coils, distributor cap and rotor, fuel and oil filters. Next will be an aluminum radiator, and see if I still have my Escort E-fan. I also need an FC alternator, although I think Charles still has my old one. Once the engine is running, the chassis work begins. Then the body work/paint, and last interior. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5