Falcore

Force13b · 02-10-2011, 03:39 PM

Bought from dudemaaan on this forum.

RE hood struts

Ended up changing the fuel system around. I was told hooking the feed up to the secondary rail was better so that's the way i went. If you have any suggestions let me know.

Pump mounted

Meth line i wrapped it since braided lines have a tendency to eat through things

So i first tried to put the novel in the black coupler i had only problem is it's to thick and i couldn't thread on the backing to seal the coupler

So i had to use an old blue coupler i had that's a bit smaller i'm sure it will work right but i need to find something else. You can see the silver washer looking thing on the blue i couldn't get that piece on the black coupler

Fixed

Pressure light Red when building Green when on

Low level light

Fuse block for pump

Main power and main ground just left to run and a retune yaaa

02-10-2011, 03:39 PM	#1
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	Bought from dudemaaan on this forum. RE hood struts Ended up changing the fuel system around. I was told hooking the feed up to the secondary rail was better so that's the way i went. If you have any suggestions let me know. Pump mounted Meth line i wrapped it since braided lines have a tendency to eat through things So i first tried to put the novel in the black coupler i had only problem is it's to thick and i couldn't thread on the backing to seal the coupler So i had to use an old blue coupler i had that's a bit smaller i'm sure it will work right but i need to find something else. You can see the silver washer looking thing on the blue i couldn't get that piece on the black coupler Fixed Pressure light Red when building Green when on Low level light Fuse block for pump Main power and main ground just left to run and a retune yaaa Last edited by Force13b; 02-10-2011 at 03:42 PM.