Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

[vex]

Check your emails/.

[TitaniumTT]

Nice.... I'm going to run one of those electric cutouts on the WG on my FD. Boost activated too becuase I'll be running one of those trim switchs again so it only opens to the atmosphere when it's 75% of max boost and up. Not quit sure how I'm going to do that yet, but that's how I want to run it.

Still got a lot of things to figure out with that car actually.... it would probably help if I could start working on it

Originally Posted by vex

Check your emails/.

Did, thanks, check yers

[TitaniumTT]

So I figured I'd finish the updates that I started. Got nothing done on the FC yesterday, yesterday was a landi day. Got the bulkhead back in, windshield in, and the harness laid out. It actually looks like a truck again and not the munster mobile tha it's been stuck as for the last 3 weeks

So for anyone that saw the FC on the Epic Road Adventure... they knew she was FILTHY..... I didn't know how filthy untill I started working on the rear. A few years back I bought an S5 rear bumper from Fritz Flynn who claimed it was in perfect condition, when it arrived both of the exhaust cutouts were burned... badly So I spoke with my body guy and he kinda laughed at the thought of repairing burnt and melted plastic. I thought I'd give it a try. It lasted a year before it fell off. Oh well. On the list was replace the bumper, or go for the carbon Fibre exhaust guards to cover up the nastiness. Chibikougan gave me one HELL of a deal on a set of gaurds so I picked them up.

Here's what I started with..... not bad right?



Yeah well....... look at it from a different angle



I spent quite a long time washing, then compounding, then glazinging and finally waxing the rear bumper. I was pretty surprised to tell the truth, it came right back to life!



But you can see better what I'm talking about regarding the melting. Fritz Flynn.... bad seller!



Then I decided to move onto a few other parts.... namely everthing in the rear of the girl was taken apart and cleaned entirely... check out the film on the tails!

Two decent pics showing just how awefull the buildup was.... nasty




Now that's an ass! Spent quite a long time fiddling with the bumper trying to get it straight.... that's much better than it was. The Carbon Exhaust guards fit great.... next is to poish up the tips again and then we're done on this end.

[TitaniumTT]

Now that's an ass! Spent quite a long time fiddling with the bumper trying to get it straight.... that's much better than it was. The Carbon Exhaust guards fit great.... next is to poish up the tips again and then we're done on this end.



Today I should be able to get the new overflow tank built and mounted, and the interior back together so I can take it apart in the next few weeks when I go to drop the 6-spd in, I'll need a new boot for the tranny tunnel... becuase that had to be trimmed to fit the new tranny, and of course drop those Cup-Holders in place if I can ever find them.... ok..... back to work I suppose

[chibikougan]

Originally Posted by TitaniumTT

Now that's an ass! Spent quite a long time fiddling with the bumper trying to get it straight.... that's much better than it was. The Carbon Exhaust guards fit great.... next is to poish up the tips again and then we're done on this end.



Today I should be able to get the new overflow tank built and mounted, and the interior back together so I can take it apart in the next few weeks when I go to drop the 6-spd in, I'll need a new boot for the tranny tunnel... becuase that had to be trimmed to fit the new tranny, and of course drop those Cup-Holders in place if I can ever find them.... ok..... back to work I suppose

Mmmm they look better then I ever could have imagined!

[Fritz Flynn]

I sold you an S5 bumper? I don't think so. I've never sold an FC part of any sort.

Please correct/fix your comments.

THANKS!

Originally Posted by TitaniumTT

So I figured I'd finish the updates that I started. Got nothing done on the FC yesterday, yesterday was a landi day. Got the bulkhead back in, windshield in, and the harness laid out. It actually looks like a truck again and not the munster mobile tha it's been stuck as for the last 3 weeks

So for anyone that saw the FC on the Epic Road Adventure... they knew she was FILTHY..... I didn't know how filthy untill I started working on the rear. A few years back I bought an S5 rear bumper from Fritz Flynn who claimed it was in perfect condition, when it arrived both of the exhaust cutouts were burned... badly So I spoke with my body guy and he kinda laughed at the thought of repairing burnt and melted plastic. I thought I'd give it a try. It lasted a year before it fell off. Oh well. On the list was replace the bumper, or go for the carbon Fibre exhaust guards to cover up the nastiness. Chibikougan gave me one HELL of a deal on a set of gaurds so I picked them up.

Here's what I started with..... not bad right?


Yeah well....... look at it from a different angle


I spent quite a long time washing, then compounding, then glazinging and finally waxing the rear bumper. I was pretty surprised to tell the truth, it came right back to life!


But you can see better what I'm talking about regarding the melting. Fritz Flynn.... bad seller!


Then I decided to move onto a few other parts.... namely everthing in the rear of the girl was taken apart and cleaned entirely... check out the film on the tails!

Two decent pics showing just how awefull the buildup was.... nasty

Now that's an ass! Spent quite a long time fiddling with the bumper trying to get it straight.... that's much better than it was. The Carbon Exhaust guards fit great.... next is to poish up the tips again and then we're done on this end.