Go Back   Rotary Car Club > Tech Discussion > Show your rotary car build up.

Show your rotary car build up. Show off your Rotary Car build!

Reply
 
Thread Tools Display Modes
Old 03-14-2011, 09:10 PM   #1
2gslse
Rotary Fanatic
 
Join Date: Apr 2008
Location: front royal va
Posts: 440
Rep Power: 18
2gslse is on a distinguished road
[QUOTE=TitaniumTT;143470] I'd say something about the cobb, but I don't know where to start! There's got to be more you can do than uncork the exhaust.... Damn, if we could play with timing... you could definately take it up a notch...This instigating is fun

Why don't you have an FC?


Had a FC at one time it was a bare-bones '86 no sunroof,steel wheeled,aluminum hood car fun to drive but wasn't my style I sold it for a profit and bought FB parts. I've always loved the FB's lines more than the FC.
__________________
____________________________________________
1976 Cosmo needing lots of work
1993 Rx-7 410 RWHP single turbo toy
1985 Rx-7 toy/project car 411HP stoplight terror
2001 Dodge ram 4wd.parts hauler
2016 Ram 2500 cause its a hemi
2006 VW TDI commuter
__________________________________________


I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...
2gslse is offline   Reply With Quote
Old 03-14-2011, 10:02 PM   #2
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Quote:
Originally Posted by WE3RX7 View Post
He doesn't want an FC because there would be no point to building a car.. he'd already have the perfect one.


Quote:
Originally Posted by WE3RX7 View Post
I would like to play with the timing some on the cobb with the GM coils. I actually took some of Dave's adjustment and built a new map for the rx8 as well. When we go back up for the dyno, I'll run it on the stock tune (which we proved was by far the best thus far) and then again with the new map and see where we are. I dont want to dive into tuning the timing at that point, I'd rather get some more monitoring in place (EGT, etc) before getting too far into it.
eeeeehhhhhh..... I think you're just waiting till you have some more time/coin to dump into the ole' 8 chasing that elusive 195... I think I was doing that with 2 puked turbo's

Quote:
Originally Posted by WE3RX7 View Post
Anyway... sorry for the thread jack. Actually, I'm not. Without thread jacks, this would just be another boring turbo swap FC build thread that nobody really pays attention to and is only destined to end as they all do with the owner scrapping the whole idea and going V8
haahahahahahaahahahaaa..... A) y'all know I would never do a v8 into an FC.... I would swap out for a cosworth, or some exotic boosted 4 clyinder, or a v6 twin turbo... but never an LS.... see below



2nd.... more importantly.... AT LEAST MY THREAD GETS REGULAR UPDATES!!!!!!1

Quote:
Originally Posted by 2gslse View Post
Had a FC at one time it was a bare-bones '86 no sunroof,steel wheeled,aluminum hood car fun to drive but wasn't my style I sold it for a profit and bought FB parts. I've always loved the FB's lines more than the FC.
Steel wheeled? Not stock were they?

I thought the exterior lines of the FD>FC>FB but interior was FD>FB>FC bang for the buck..... well.... none
Attached Images
File Type: jpg LS1swap.jpg (74.0 KB, 70 views)
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-

Last edited by TitaniumTT; 03-14-2011 at 10:09 PM.
TitaniumTT is offline   Reply With Quote
Old 03-14-2011, 10:16 PM   #3
hades
Rotary Fanatic
 
Join Date: Mar 2008
Location: Freedom Land
Posts: 316
Rep Power: 18
hades will become famous soon enough
I wonder if LS1's have exhaust sleeve issues




















__________________
This is going to tear
hades is offline   Reply With Quote
Old 03-14-2011, 11:14 PM   #4
helghast7
F yo couch!
 
helghast7's Avatar
 
Join Date: Dec 2009
Location: Belleville, NJ
Posts: 223
Rep Power: 16
helghast7 is on a distinguished road
Quote:
Originally Posted by TitaniumTT View Post
In the S4 world. I've seen that most of them are pretty much the same. The only difference that I've seen is in the rear harness, some have the rear window wiring, some don't, but as far as I remember, the front and EM harnesses are all the sameeeeeeee.... eeeeeee save the obvious n/a turbo differences.
yea but their vast differences in that harness, which btw after studying the fsm i swear ive found plugs that arent even in the book, it makes no sense

Quote:
Originally Posted by TitaniumTT View Post
sooooooo, you'll be running down to Deals on twins then?
idk man, i wanna go but shits kinda weird with everyone, theirs like little weird stuff goin on, makes things really uncomfortable

but thats not the real thing that would stop me, its all about the money mang, spare funds aint lookin to big at the moment and ive got a lot on my plate, if things simmer down by then i can see myself making it

Quote:
Originally Posted by TitaniumTT View Post
Builds boost on it's own.... at least it still works.
well it used to do that, there taking the slow dump so currently their lag monsters and break up on high end so no KIT car for me now

i miss it oh so much

KIT COME BACK!!!!! lol

Quote:
Originally Posted by TitaniumTT View Post
The one thing with installing them in the FC with a standalone, where to get the required signals? I would do a Hall Effect sensor off the driveshaft personally, or some other way other than tapping into the ignition system.
well i know for the fd it uses the spedo sensor and the NSS, idk about the fc since i never had...well anything on that car

i would imagine since CC came on the higher end models that it gets the signal somewere from one of the VSS since at least the s4 uses a real spedo cable, i dont think it would use that

but really thats all you would need to make it a closed system since it has its own little module...unless mazdatrix has been lying to us all these years


Quote:
Originally Posted by TitaniumTT View Post
Don't think so. You can usually setup an account before you've finished your car if you think you're going to race.
damn, Dave said mazda comp diff mounts for the FD were the best ones to get and you were the only person i could think of that could get them..i gotta figure this out

Quote:
Originally Posted by TitaniumTT View Post
haahahahahahaahahahaaa..... A) y'all know I would never do a v8 into an FC.... I would swap out for a cosworth, or some exotic boosted 4 clyinder, or a v6 twin turbo... but never an LS.... see below
idk man, if i had the bank i would love to throw a v8 in the ol FC..just not an LS

have you ever heard a 360 modena's 3.6l v8 scream? pure sex

Quote:
Originally Posted by TitaniumTT View Post
Steel wheeled? Not stock were they?
ohhh man i used to have those phone dials...god aweful

Quote:
Originally Posted by TitaniumTT View Post
I thought the exterior lines of the FD>FC>FB but interior was FD>FB>FC bang for the buck..... well.... none
FD pwns lol
__________________
87' n/a FC
94' FD-360whp, 300lbs-tq at 14psi on twins
92' ZZR-600 sold
07' CBR600RR
more to come
helghast7 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:18 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com