|
Rotary Of The Month Contest Every Month we are going to pick a car and rotorhead to be featured as RCC, Car of the Month. At the end of the year, we'll select car of the year and prize will be given. |
|
Thread Tools | Display Modes |
![]() |
#5 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
my 1982 Rx7 rally car
its had a long, hard life. Originally, built as an SCCA Pro Rally car, it has since been grandfathered into a Rally America logbook. I am the third owner of this car since it started life on the dirt. Many interesting ideas and innovations had been developed by the previous owners, and i certainly added a few of my own. Modifications: -12a, streetport with a weber 48 IDA. GM alternator to get the amperages needed. -dual inline oil cooler setup -Exhaust is a racing beat header, lightly hacked, into a custom two pipe arrangement made from DOM roll bar tubing (exhausts take a beating on stage) -Miata gearset adapted into the transmission. -4.88 Mazdaspeed final drive, with revamped oem LSD. Rear axle has been reinforced. Additionally, the front frame has been reinforced. -Revalved Bilsteins and custom made springs in a higher rate. -currently using a terraphone intercom, but plan is to replace it with the peltor model. -Sparco EVO seats -dashboard is "flocked" to solve the issue of sun reflecting off the dash. -use of aluminum and HDPE for underbody protection -typically running Silverstone tires, but might be switching to Lassa due to cost. ![]() ![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
Bookmarks |
|
|