Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild - Page 74

MaczPayne · 05-12-2011, 01:10 AM

There's a list every year!

Touching yourself should be no. 1 on that list.

project86 · 05-12-2011, 07:49 AM

Quote:

Originally Posted by FC3S Murray

You should reconsider my hand across you face Be-otch

......sorry, I am sexually frustrated since Aunt Flow has been in the house the last week.

haha why on earth would you slap me on the face??

***TitaniumTT*** · 05-12-2011, 12:20 PM

Quote:

Originally Posted by EJayCe996

I went out there briefly... I do blend in with the darkness a little easier than AJ

I said something but everyone was zoned out tired around your car and paid me no attention so I went back on inside

THat's right!@!! I remember now.... Yeah, those things are monsters... Brian does like very much.

Quote:

Originally Posted by Monkman33

If you ride the red tide, you wash up on shore.

in other words, do it in the shower.

This is good advice....

***TitaniumTT*** · 05-12-2011, 12:22 PM

Quote:

Originally Posted by need RX7

What happens at DGRR stays at DGRR?

Yeah.... pretty much.... there was lube, a dining room table, a bunch of drunk guys.... and in the morning the varnish was stripped off..... and people took pics of me asleep on the pool table

Embedded was the word I was looking for.... tierd.... so very sleepy.... And most of them came out... there are a few chips though.... this is why that bumper gets repainted every damn year.... at least all the oil is finally off the windshield

***TitaniumTT*** · 05-12-2011, 12:23 PM

Quote:

Originally Posted by MaczPayne

There's a list every year!

Touching yourself should be no. 1 on that list.

The list never ends.... it just keeps getting recycled and added tooo and they things get done, then things break then things get added and wash rinse repeat

2gslse · 05-12-2011, 09:37 PM

OK wed. is just about over did you get to Dave's today?

***TitaniumTT*** · 05-12-2011, 09:48 PM

Next Wednesday, the 18th.... and I think I'm going to have to puch it back a wee bit.... for a few reasons....

The boat that I was prepping today was a fucking stye!!! The shrinkwrap tore... or I should say the yard that stored the piece of poo tore the shrinkwrap and 6 month worth of shit flew in, mold, dirt, all kinds of nastiness... it's a miracle the thing is as clean as it is. Of course I realized this AFTER I slept in a little, lalligagged around, did some errands, touched myself, looked at the landi, played with my dogs THEN I uncovered the damn thing.... ugh... I wanted to get the landi's wiring done today as well and if the boat hadn't kicked my ass until 20:30... I probably would've.... bastard made me work for my money this year

So now I'm thinking I'll use Wednesday... the next day off.... yes that is technically 1 day off in 2 weeks.... to do the landi and I'll use the extra time to finish off the small list I have for the FC.

I need to get a hydaylic press as well and I'm going to have to pull the UIM to weld on some fittings, wait for lines to be made etc etc etc...... WHY DIDN"T YOU WELD MY HOOD SHUT!@!!!!!!!

Oh.... I'll be experimenting with brake pads as well

43 days till Limerock!!!!

vex · 05-12-2011, 10:00 PM

I'm tuning tomorrow. you should make the trip.

EJayCe996 · 05-12-2011, 10:56 PM

Quote:

Originally Posted by TitaniumTT

THat's right!@!! I remember now.... Yeah, those things are monsters... Brian does like very much.

I'm trying to remember what I said but I had way too much moonshine by that point. Watching you do your bearings was hard enough to concentrate on.

***TitaniumTT*** · 05-13-2011, 06:38 PM

Quote:

Originally Posted by vex

I'm tuning tomorrow. you should make the trip.

Where are you tuning? You going to my sweetie Davey?

***TitaniumTT*** · 05-13-2011, 07:07 PM

Quote:

Originally Posted by EJayCe996

I'm trying to remember what I said but I had way too much moonshine by that point. Watching you do your bearings was hard enough to concentrate on.

that's because there was a hobbit jumping around distracting everyone

vex · 05-13-2011, 07:29 PM

Quote:

Originally Posted by TitaniumTT

Where are you tuning? You going to my sweetie Davey?

unfortunately I'm not. I'm too poor for that. Tuning will consist of me sitting in the car and hopping I get it drivable.

2gslse · 05-13-2011, 07:45 PM

I would get it running and driving but Dave is very reasonable and highly recommended

vex · 05-13-2011, 07:51 PM

I understand that. The issue is, I literally have only enough cash to get me to northern va and to my internship for the first two weeks. My car is no where near where I want it to be nor do I think any sane person would strap it to a dyno yet. Dave is just out of the question and I need the thing drivable yesterday.

***TitaniumTT*** · 05-13-2011, 09:14 PM

It's not that Dave is reasonable, it's that HE CHARGES NO WHERE NEAR WHAT HE IS WORTH!!!!!!!

The man should be charging 4-8X what he does, for the amount of time he spends on each car.... it's ridiculous, it really is. Seriously T, get it running, make it driveable.... get it to where it's safe, then go to Dave. He'll take care of ya... shit, if you're lucky I'll even drive out for the event

RX7's make pisspoor dailies unless they're n/a and pretty bone stock... I've been saying this for years. People who want to drive modded 7's need some form of daily driving reliability.... I have my faithful Mighty XJ

05-12-2011, 01:10 AM	#1096
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	There's a list every year! Touching yourself should be no. 1 on that list. __________________ Johnson TA FC in the works!

05-12-2011, 09:37 PM	#1101
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	OK wed. is just about over did you get to Dave's today? __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

05-12-2011, 09:48 PM	#1102
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Next Wednesday, the 18th.... and I think I'm going to have to puch it back a wee bit.... for a few reasons.... The boat that I was prepping today was a fucking stye!!! The shrinkwrap tore... or I should say the yard that stored the piece of poo tore the shrinkwrap and 6 month worth of shit flew in, mold, dirt, all kinds of nastiness... it's a miracle the thing is as clean as it is. Of course I realized this AFTER I slept in a little, lalligagged around, did some errands, touched myself, looked at the landi, played with my dogs THEN I uncovered the damn thing.... ugh... I wanted to get the landi's wiring done today as well and if the boat hadn't kicked my ass until 20:30... I probably would've.... bastard made me work for my money this year So now I'm thinking I'll use Wednesday... the next day off.... yes that is technically 1 day off in 2 weeks.... to do the landi and I'll use the extra time to finish off the small list I have for the FC. I need to get a hydaylic press as well and I'm going to have to pull the UIM to weld on some fittings, wait for lines to be made etc etc etc...... WHY DIDN"T YOU WELD MY HOOD SHUT!@!!!!!!! Oh.... I'll be experimenting with brake pads as well 43 days till Limerock!!!! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-12-2011, 10:00 PM	#1103
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	I'm tuning tomorrow. you should make the trip. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

05-13-2011, 07:45 PM	#1108
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	I would get it running and driving but Dave is very reasonable and highly recommended __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

05-13-2011, 07:51 PM	#1109
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	I understand that. The issue is, I literally have only enough cash to get me to northern va and to my internship for the first two weeks. My car is no where near where I want it to be nor do I think any sane person would strap it to a dyno yet. Dave is just out of the question and I need the thing drivable yesterday. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

05-13-2011, 09:14 PM	#1110
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	It's not that Dave is reasonable, it's that *HE CHARGES NO WHERE NEAR WHAT HE IS WORTH!!!!!!!* The man should be charging 4-8X what he does, for the amount of time he spends on each car.... it's ridiculous, it really is. Seriously T, get it running, make it driveable.... get it to where it's safe, then go to Dave. He'll take care of ya... shit, if you're lucky I'll even drive out for the event RX7's make pisspoor dailies unless they're n/a and pretty bone stock... I've been saying this for years. People who want to drive modded 7's need some form of daily driving reliability.... I have my faithful Mighty XJ __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**