Spark plug issues - Page 2

NoDOHC · 05-22-2011, 07:46 AM

Quote:

Originally Posted by scotty305

I'd be very interested to see photos of the eroded spark plugs, if you've still got them.

I got my camera working again!

The one on the left is the leading (which was much worse)

I apologize for the pictures, my camera wasn't that good when it was new.

If you look carefully you can see that the tip of the center electrode is about 3 mm retracted from outer electrodes. On new plugs it is almost flush.

Barry Bordes · 05-23-2011, 10:48 AM

NoDOHC, does your camera have a flower symbol which designates the macro setting.
Select the flower and refocus that picture of the plugs.
Thanks,
Barry

NoDOHC · 05-23-2011, 05:33 PM

I need a new camera, that was macro mode.

I tried very hard to get the focus right, but I think that the lens has lost some mobility over the years and sand-infiltration events.

Hopefully you can see ok in those pictures, I can take some from further away too.

scotty305 · 05-28-2011, 11:04 PM

Yes those aren't the best photos... my work had a camera that would never focus well when too close, and the display was not a high enough resolution to show that you had just taken a blurry shot. You could sometimes get a decent image by using very high resolution and taking the shot from further away. Taking photos in an area that got lots of natural light helped too, but stay away from direct sunlight or fluorescent lights.

It got to be such a pain that we brought our own personal cameras in when we knew we would need to take photos, and eventually the company picked up a decent camera for about $50-100.

05-23-2011, 05:33 PM	#18
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	I need a new camera, that was macro mode. I tried very hard to get the focus right, but I think that the lens has lost some mobility over the years and sand-infiltration events. Hopefully you can see ok in those pictures, I can take some from further away too. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

05-28-2011, 11:04 PM	#19
scotty305 Rotary Fan in Training Join Date: Mar 2008 Location: Culver City, CA Posts: 84 Rep Power: 18	Yes those aren't the best photos... my work had a camera that would never focus well when too close, and the display was not a high enough resolution to show that you had just taken a blurry shot. You could sometimes get a decent image by using very high resolution and taking the shot from further away. Taking photos in an area that got lots of natural light helped too, but stay away from direct sunlight or fluorescent lights. It got to be such a pain that we brought our own personal cameras in when we knew we would need to take photos, and eventually the company picked up a decent camera for about $50-100. Last edited by scotty305; 05-28-2011 at 11:07 PM.

05-23-2011, 10:48 AM	#17
Barry Bordes Rotary Fanatic Join Date: Feb 2008 Location: Slidell, LA Posts: 191 Rep Power: 18	NoDOHC, does your camera have a flower symbol which designates the macro setting. Select the flower and refocus that picture of the plugs. Thanks, Barry