Well I finally got the car on the road! Had the exhaust finished Saturday, drove it home in the afternoon and started tuning the Haltech. I drove it to the street legal drags at Fontana yesterday, just to watch, and on the way home disaster struck. The engine developed a rod knock but made it home without throwing a rod.
I discovered quickly that there were some slight engine issues, like a bit of blue smoke on acceleration that was worse when the engine wasn't all the way up to operating temps. So I figured I was gonna have to build the engine sooner than later...but not this quick.
So the engine comes back out this Friday and I'm tearing it down Saturday. Then its off to the machine shop Monday. If the crank is good, I'm going with Eagle H-beam rods, Mahle pistons, LS6 heads and a LS6 cam. If the crank is shot then I'm going the 383 stroker route with an Eagle crank and rods and Mahle pistons and the LS6 bits.
And holy shit was the car fast even with this junk engine... :shock:
06-02-2011, 12:13 PM
Threaded Mode