Actual Rotary Displacement Request

Barry Bordes Actual Rotary Displacement... 05-31-2011, 10:49 AM

FerociousP So.... which side are you... 05-31-2011, 11:31 AM

j9fd3s i have thought about this,... 05-31-2011, 02:08 PM

Barry Bordes On the contrary, if a 4... 05-31-2011, 02:46 PM

Barry Bordes 13B = 1300cc or 1.3 liter... 05-31-2011, 02:25 PM

Libor What is point of this? It... 05-31-2011, 04:41 PM

Monkman33 I thought someone had matched... 05-31-2011, 07:42 PM

RETed Need to stop equating the... 06-01-2011, 07:16 AM

t_g_farrell I'm going to offer a... 06-01-2011, 08:48 AM

PhillipM It's not that because for... 06-02-2011, 09:16 AM

More replies below current depth...

My5ABaby Of course Mazda says it's a... 06-02-2011, 09:38 AM

Barry Bordes I am saying that the Rotary’s... 06-01-2011, 11:34 AM

NoDOHC I agree Barry, the engine... 06-01-2011, 10:49 PM

RICE RACING I teach this subject... 06-02-2011, 03:34 AM

RICE RACING I decided to put this... 06-02-2011, 03:44 AM

My5ABaby Would apples to apples be... 06-02-2011, 08:37 AM

Barry Bordes Yes Peter I agree that it... 06-02-2011, 11:48 AM

RICE RACING Barry, ALL of the total sum... 06-02-2011, 04:26 PM

RICE RACING For EVERYONE remember this. ... 06-02-2011, 04:32 PM

Libor Peter, I was curious about... 06-02-2011, 05:28 PM

More replies below current depth...

Barry Bordes Actually example (3) (shown... 06-02-2011, 09:04 PM

RICE RACING I am ONLY refering to the... 06-02-2011, 10:39 PM

Monkman33 Guys, displacement by... 06-03-2011, 07:38 AM

RICE RACING It's not a argument, its... 06-03-2011, 05:25 PM

Barry Bordes OK, so my guess is that this... 06-05-2011, 11:48 AM

Monkman33 Wow.... you are so off base... 06-05-2011, 05:59 PM

NoDOHC Peter and Barry, I have too... 06-05-2011, 01:15 PM

diabolical1 ^ this! i'm not an... 06-06-2011, 06:14 PM

Barry Bordes Hey DOHC, who are you calling... 06-05-2011, 01:33 PM

Libor This is not valid Barry and... 06-05-2011, 02:21 PM

RICE RACING Forums! Difference between... 06-05-2011, 04:09 PM

RICE RACING I'll leave you with one... 06-05-2011, 04:14 PM

My5ABaby Food for thought... ... 06-06-2011, 08:08 AM

RotorDad Okay where I do agree with... 06-05-2011, 05:24 PM

cewrx7r1 Remember the old saying:... 06-06-2011, 09:33 AM

Monkman33 The key thing here is that... 06-05-2011, 06:33 PM

RotorDad I remember reading this... 06-05-2011, 07:10 PM

Monkman33 I honestly don't know why... 06-05-2011, 07:45 PM

RotorDad I just posted the link... 06-06-2011, 12:13 AM

Monkman33 :-) Wasn't making a stab at... 06-06-2011, 12:27 AM

vex Fuel to the fire: ... 06-05-2011, 07:16 PM

Monkman33 All of those support what I... 06-05-2011, 07:31 PM

Barry Bordes Peter, please don’t take this... 06-05-2011, 08:51 PM

Libor Hey, nothing wrong with being... 06-06-2011, 09:02 AM

My5ABaby A bit, no, nothing wrong. ... 06-06-2011, 01:47 PM

Monkman33 You are talking "equivalences... 06-06-2011, 02:30 PM

Monkman33 if you count every face, then... 06-06-2011, 06:17 PM

diabolical1 ^ understood. :) but what... 06-06-2011, 06:41 PM

vex The confusion with everyone... 06-06-2011, 07:33 PM

Barry Bordes What is the value of Line 1-2... 06-07-2011, 09:44 PM

vex That's an idealized otto... 06-08-2011, 07:35 AM

More replies below current depth...

Monkman33 the reason the displacement... 06-06-2011, 08:26 PM

vex I don't think you're getting... 06-06-2011, 09:01 PM

diabolical1 vex ~ again, in as much as... 06-06-2011, 09:42 PM

Monkman33 You cant "just ignore" the... 06-06-2011, 09:50 PM

vex Otto cycle is just the... 06-06-2011, 10:32 PM

Monkman33 wow. very well thought out... 06-06-2011, 11:03 PM

NoDOHC As I stated before, it is... 06-07-2011, 12:52 AM

vex No it's not, and you can't... 06-07-2011, 08:10 AM

Monkman33 I would agree completely. I... 06-07-2011, 10:34 AM

diabolical1 no, i was familiar with the... 06-08-2011, 11:09 AM

vex Why? I don't like counting... 06-13-2011, 04:08 PM

More replies below current depth...

Libor Food for thought... 06-07-2011, 09:09 AM

My5ABaby I still vote to compare... 06-08-2011, 09:03 AM

vex You mean like TDC to BDC ;) 06-08-2011, 09:33 AM

Libor I understand your reasoning... 06-08-2011, 10:21 AM

vex That's all displacement is... 06-08-2011, 10:59 AM

Libor Rotary maybe had slight edge... 06-08-2011, 09:43 AM

My5ABaby I'm not saying the rotary... 06-08-2011, 12:42 PM

RETed WTH... Why did that post... 06-13-2011, 03:08 PM

vex Of consequence; this comes... 06-09-2011, 08:57 PM

FerociousP I think everyone in this... 06-13-2011, 10:26 AM

My5ABaby Love... 06-13-2011, 03:28 PM

scotty305 At one of the Sevenstock tech... 06-14-2011, 01:48 AM

GorillaRE This may be true but I think... 06-14-2011, 05:34 AM

Barry Bordes This would probably be a good... 06-14-2011, 04:52 PM

RICE RACING There is no question at all... 06-15-2011, 02:20 AM

FC Zach Well said! short, simple, and... 06-15-2011, 05:22 AM

Barry Bordes From Webster’s New Collegiate... 06-15-2011, 07:54 AM

RICE RACING "all pistons" = "all faces"... 06-15-2011, 04:20 PM

RICE RACING Baz, Would you only... 06-15-2011, 04:32 PM

Barry Bordes Peter, Maybe it would help... 06-16-2011, 10:42 AM

RICE RACING It has an effect if one... 06-16-2011, 08:40 PM

My5ABaby The totality of the gun (i.e.... 06-17-2011, 08:16 AM

calculon Out of curiosity, what does... 06-15-2011, 05:19 PM

Libor I would be interested how we... 06-17-2011, 08:37 AM

RICE RACING :iamwithstupid: 06-17-2011, 09:21 AM

RICE RACING Anyone of you nobodies could... 06-13-2011, 08:05 AM

RICE RACING The problem with most of you... 06-13-2011, 08:13 AM

RICE RACING FOr some who love comparisons... 06-13-2011, 08:26 AM

Barry Bordes It is interesting that you... 06-13-2011, 10:16 AM

06-05-2011, 04:14 PM	#11
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	I'll leave you with one simple point to ponder! Why when you do a compression test do you measure ALL THREE FACES over 1080 degree's? per rotor? Why is the engine classed as not healthy and due for rebuild if ANY ONE of these three faces per rotor is below another by any great margin? Why wont the engine function normally with only two apex seals per rotor if its only 1308cc for a 13B? Why Why Why Why Why?????? Cause Rice racing is RIGHT!@ You are WRONG! Have fun in your thread when you want to learn about engineering feel free to E-Mail me __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration