|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
|
Thread Tools | Display Modes |
|
|
07-31-2011, 10:23 PM
|
#1 | |
|
RCC Contributor
Join Date: Mar 2008
Posts: 505
Rep Power: 18  |
Let it soak in some PB Blaster and put it in the vice and tapped at it with a scraper and hammer. Light tapping separated it from the bolt. It looks like they did use a couple dabs of silicone sealant. There were two spots on opposite sides that matches the sealant used on the housing legs.
__________________
Quote:
1990 Vert/ S5-JDM 13BT (rebuilt but with issues I'm working out). Rtek N370 1.7, 550/800 injectors, FD fuel pump, RB REV TII exhaust, Tein springs and Illuminas |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
