Tegheim - Home made 4 rotor Wolvo 142 - Page 12

My5ABaby · 12-16-2011, 12:04 PM

What's the weight and cost of the titanium ones?

Tegheim · 12-16-2011, 02:15 PM

+24min

Tegheim · 12-16-2011, 04:09 PM

Force13b · 12-16-2011, 04:17 PM

I look forward to every update in this tread.

Tegheim · 12-17-2011, 05:57 AM

Tegheim · 12-17-2011, 10:48 AM

If this doesn't work, I think this would be a good bookrest..

Tegheim · 12-17-2011, 11:29 AM

Raksj04 · 12-17-2011, 11:35 AM

What is the start weight and finish weights again?

Tegheim · 12-17-2011, 01:44 PM

22Kg startweight.
About 19.5kg will be removed

Tegheim · 12-18-2011, 07:01 AM

Now I've cleaned up after me and takes weekend.
This took a lot longer than I guessed. Then it's always so well with the first, but had probably hoped for smoother processing

Has anyway tried to run a finishing the outline today. Is not quite satisfied, however, it does not matter for the function. Has left 0.5mm for further testing

To be continued in the Christmas Holidays!

Mazdabater · 12-19-2011, 06:43 PM

Beautiful

GtoRx7 · 12-20-2011, 02:45 AM

Excellent work!!!!!! I am ultra impressed

Tegheim · 12-20-2011, 03:15 AM

Thank you all

Will be continued...

RICE RACING · 12-20-2011, 04:39 AM

Your talents are wasted on rotaries and volvo's!

You should be working on making the replacement space shuttle

Tegheim · 12-20-2011, 03:29 PM

Haha, I don't know how a space shuttle works?! :P

Tried a little bit smaller step this face. What do you think about the comp-ratio in the bottom?
Good or silly...?

12-16-2011, 12:04 PM	#166
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	What's the weight and cost of the titanium ones? __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

12-20-2011, 02:45 AM	#177
GtoRx7 Rotary Fanatic Join Date: Jul 2008 Posts: 151 Rep Power: 17	Excellent work!!!!!! I am ultra impressed __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

12-20-2011, 04:39 AM	#179
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	Your talents are wasted on rotaries and volvo's! You should be working on making the replacement space shuttle __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

12-16-2011, 02:15 PM	#167
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	+24min

12-16-2011, 04:09 PM	#168
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15

12-16-2011, 04:17 PM	#169
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	I look forward to every update in this tread.

12-17-2011, 05:57 AM	#170
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15

12-17-2011, 10:48 AM	#171
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	If this doesn't work, I think this would be a good bookrest..

12-17-2011, 11:29 AM	#172
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15

12-17-2011, 11:35 AM	#173
Raksj04 I have Ultra power in me. Join Date: Sep 2011 Posts: 457 Rep Power: 14	What is the start weight and finish weights again?

12-17-2011, 01:44 PM	#174
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	22Kg startweight. About 19.5kg will be removed

12-18-2011, 07:01 AM	#175
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Now I've cleaned up after me and takes weekend. This took a lot longer than I guessed. Then it's always so well with the first, but had probably hoped for smoother processing Has anyway tried to run a finishing the outline today. Is not quite satisfied, however, it does not matter for the function. Has left 0.5mm for further testing To be continued in the Christmas Holidays!

12-19-2011, 06:43 PM	#176
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS Posts: 326 Rep Power: 16	Beautiful

12-20-2011, 03:15 AM	#178
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Thank you all Will be continued...

12-20-2011, 03:29 PM	#180
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Haha, I don't know how a space shuttle works?! :P Tried a little bit smaller step this face. What do you think about the comp-ratio in the bottom? Good or silly...?