whats the best exhaust set up for my rx2?

patsrx2 · 12-06-2011, 02:42 AM

i have an rx2 with a streetport and 48 idas and i was wondering what is the best exhaust set up i should use?? thanks

mattallac · 12-06-2011, 03:13 AM

well first off :12a or 13b .if its a 12a my experience has been road race header then 2 into 1 y ,2 1/2 all the way back. pre silencer i use a borla straight through muffler and the same in the back .make sure the borlas you buy are all stainless steel packing !.if its a 13b i use a road race header ,dual 2 "into a dual 2 in and out borla or magnaflow (if its magna flow you need to cut the muffler open and pack it with course stainless steel wool)and for the rear a dual 2" in to 2 1/2 single out.all the bends need to be manderal and .065 wall stainless or 1/8 wall mild steel.if you like to spend $ you can buy a prima flow muffler for about 450.00 and it will make it quieter than the straight through mufflers.

SLIDN2 · 12-17-2011, 11:10 PM

I had the racing beat road race header with a straight pipe into a RB power pulse exhaust for a TII and she sounded great.
My engine was a Half bridge TII NA.

Here video.

http://www.youtube.com/watch?v=2l_ZEwmdLDQ

12-06-2011, 02:42 AM	#1
patsrx2 The Newbie Join Date: Oct 2011 Posts: 6 Rep Power: 0	whats the best exhaust set up for my rx2? i have an rx2 with a streetport and 48 idas and i was wondering what is the best exhaust set up i should use?? thanks

12-17-2011, 11:10 PM	#3
SLIDN2 Self Proclamed Genius Join Date: Jun 2010 Location: Houston Posts: 21 Rep Power: 0	I had the racing beat road race header with a straight pipe into a RB power pulse exhaust for a TII and she sounded great. My engine was a Half bridge TII NA. Here video. http://www.youtube.com/watch?v=2l_ZEwmdLDQ __________________ BRAP BRAP BRAP BRAP...

12-06-2011, 03:13 AM	#2
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. Posts: 176 Rep Power: 0	well first off :12a or 13b .if its a 12a my experience has been road race header then 2 into 1 y ,2 1/2 all the way back. pre silencer i use a borla straight through muffler and the same in the back .make sure the borlas you buy are all stainless steel packing !.if its a 13b i use a road race header ,dual 2 "into a dual 2 in and out borla or magnaflow (if its magna flow you need to cut the muffler open and pack it with course stainless steel wool)and for the rear a dual 2" in to 2 1/2 single out.all the bends need to be manderal and .065 wall stainless or 1/8 wall mild steel.if you like to spend $ you can buy a prima flow muffler for about 450.00 and it will make it quieter than the straight through mufflers.