Project: "Last RX-7" by Herblenny - Page 3

***Herblenny*** · 12-15-2011, 07:30 AM

Quote:

Originally Posted by mfisher12

which mazda dealer was that picture at...i went to mazda training in Atlanta with the old guy behind your car!

Used to be called Trussville Mazda but now its called Serra Mazda.
Danny Files is a great guy!! We got an alignment there.

rdgt99 · 12-15-2011, 10:09 AM

Phil, have you decided on paint color yet?

***Herblenny*** · 12-15-2011, 11:52 AM

Quote:

Originally Posted by rdgt99

Phil, have you decided on paint color yet?

Rodney, I have an idea but haven't decided on that color for sure... I should in next couple of months.

***Herblenny*** · 12-16-2011, 11:02 AM

December 16th, 2011 - I've received some sneak peek pictures of the turbo manifold yesterday. Walker Morgan from www.MPFab.com did an excellent job.

Here are few pics from the pics he sent me!

Its made with Stainless 321, which Walker did his magic on them to look like this... Not sure if many of you seen how 321 comes form suppliers, but they looked horrible.

I'm heading over to the shop on monday to take some high res pictures with my dslr and also bring him the mid pipe and catback for him to test fit to make the DP.

Those of you who haven't heard of MPFab.com, he has worked on several exhaust systems for high end SEMA cars and custom hot rods. He also developed turbo kids for bikes and other sport compact cars.

For more information about them, go visit: www.MPFab.com

Raksj04 · 12-16-2011, 11:46 AM

I want to pet the manifold, can I pet it?

20b 3rd gen · 12-16-2011, 03:54 PM

Walker always amazes me with his welding abilities, i feel like im watching a master fabricator in the making, i remember when he 1st started learning how to build turbos back in the day @ turbo specialties with Bryan, now they both have shops of their own and they both do superb work now

***Herblenny*** · 12-19-2011, 10:22 PM

December 19th, 2011 - I went by MPFab.com this morning to drop off my titanium catback and a midpipe so, he can start working on the turbo placement and DP. I also had a chance to take a look at Walker's handy work. Man was I impress with his fabrication skills

Here are some better pics I've taken.

I have yet to see bottom mount turbo set up on a rotary and I'm excited to see how all is going to turn out!

RCCAZ 1 · 12-21-2011, 10:02 AM

Wow, so the turbo will actually be positioned down low as shown in a couple of previous posts? Should be VERY cool, not to mention the benefits of moving the heat source away from the engine block AND shortening the hotside piping to your IC. I take it that you're planning a front mount? Cant imagine there's enough room in there for a vmount IC.

Can't wait to see more progress. It will be interesting to see how they route the DP.

BTW, manifold is sick bro. Can't recall if I've ever seen welds THAT nice.

***Herblenny*** · 12-21-2011, 10:16 AM

Its not quite welded yet

Just tacked.

We are going for a V mount set up. Its going to be interesting but I think it will work.. and also retain the hood latch

Mr. Walker Morgan (from www.MPFab.com) is pretty amazing fabricator and have done some cool stuff before.. including exhaust system for my Eunos Cosmo (dolphine tip).

I will keep you guys updated on the build...

speedjunkie · 12-21-2011, 04:15 PM

Hmmm, I'm needing to get a manifold fabricated now also. And that one looks AMAZING so far.

***Herblenny*** · 12-22-2011, 09:21 AM

Quote:

Originally Posted by speedjunkie

Hmmm, I'm needing to get a manifold fabricated now also. And that one looks AMAZING so far.

I would definitely recommend Walker Morgan from www.MPFab.com but he is kind of far from you. But he does amazing work!! see below

December 22nd, 2011 - I went over to MPFab to check out the manifold progress and lend a hand if needed (not that I can do much). We also wanted to test fit the turbo and get some measurements and clearance.. But in order to finish everything up, I need to get the new steering rack.

Anyhow, here are some Walker Morgan's handy work (www.MPFab.com)

speedjunkie · 12-22-2011, 04:47 PM

I'll PM you, Phil.

I keep forgetting you're mounting this turbo upside down, it keeps throwing me off LOL. That manifold is gorgeous.

WE3RX7 · 12-22-2011, 05:03 PM

Scavenger pump in the works for that turbo setup?

***TitaniumTT*** · 12-22-2011, 05:32 PM

Quote:

Originally Posted by Herblenny

I would definitely recommend Walker Morgan from www.MPFab.com but he is kind of far from you. But he does amazing work!! see below

December 22nd, 2011 - I went over to MPFab to check out the manifold progress and lend a hand if needed (not that I can do much). We also wanted to test fit the turbo and get some measurements and clearance.. But in order to finish everything up, I need to get the new steering rack.

Anyhow, here are some Walker Morgan's handy work (www.MPFab.com)

GOOD LORD! Someone knows how to run a TIG...

Quote:

Originally Posted by Herblenny

That's just cool!

Looking great Phil, might have to head a little farther south in April

***Herblenny*** · 12-23-2011, 08:25 AM

Quote:

Originally Posted by speedjunkie

I'll PM you, Phil.

I keep forgetting you're mounting this turbo upside down, it keeps throwing me off LOL. That manifold is gorgeous.

PM replied! Yeah, Walker from MPfab.com is doing an amazing job! I have now known him for about 3 years and he's a fantastic guy with very professional business ethics. He is one of very few guys who gave me a due date and who finished the work ahead of time.

Quote:

Originally Posted by WE3RX7

Scavenger pump in the works for that turbo setup?

Scavenge pump is at MPFab and we are currently deciding on where to place it.

Quote:

Originally Posted by TitaniumTT

GOOD LORD! Someone knows how to run a TIG...

Looking great Phil, might have to head a little farther south in April

Definitely! You know you are always welcome!!

12-15-2011, 10:09 AM	#32
rdgt99 Rotary Fan in Training Join Date: Mar 2010 Location: ATL Posts: 41 Rep Power: 0	Phil, have you decided on paint color yet? __________________ Rodney

12-16-2011, 11:02 AM	#34
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	December 16th, 2011 - I've received some sneak peek pictures of the turbo manifold yesterday. Walker Morgan from www.MPFab.com did an excellent job. Here are few pics from the pics he sent me! Its made with Stainless 321, which Walker did his magic on them to look like this... Not sure if many of you seen how 321 comes form suppliers, but they looked horrible. I'm heading over to the shop on monday to take some high res pictures with my dslr and also bring him the mid pipe and catback for him to test fit to make the DP. Those of you who haven't heard of MPFab.com, he has worked on several exhaust systems for high end SEMA cars and custom hot rods. He also developed turbo kids for bikes and other sport compact cars. For more information about them, go visit: www.MPFab.com __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

12-16-2011, 03:54 PM	#36
20b 3rd gen Rotary Fanatic Join Date: Mar 2008 Location: Calera, AL Posts: 187 Rep Power: 18	Walker always amazes me with his welding abilities, i feel like im watching a master fabricator in the making, i remember when he 1st started learning how to build turbos back in the day @ turbo specialties with Bryan, now they both have shops of their own and they both do superb work now __________________ http://i37.photobucket.com/albums/e7...RRXbanner2.jpg

12-19-2011, 10:22 PM	#37
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	December 19th, 2011 - I went by MPFab.com this morning to drop off my titanium catback and a midpipe so, he can start working on the turbo placement and DP. I also had a chance to take a look at Walker's handy work. Man was I impress with his fabrication skills Here are some better pics I've taken. I have yet to see bottom mount turbo set up on a rotary and I'm excited to see how all is going to turn out! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

12-21-2011, 10:02 AM	#38
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ Posts: 288 Rep Power: 18	Wow, so the turbo will actually be positioned down low as shown in a couple of previous posts? Should be VERY cool, not to mention the benefits of moving the heat source away from the engine block AND shortening the hotside piping to your IC. I take it that you're planning a front mount? Cant imagine there's enough room in there for a vmount IC. Can't wait to see more progress. It will be interesting to see how they route the DP. BTW, manifold is sick bro. Can't recall if I've ever seen welds THAT nice. Last edited by RCCAZ 1; 12-21-2011 at 10:06 AM.

12-16-2011, 11:46 AM	#35
Raksj04 I have Ultra power in me. Join Date: Sep 2011 Posts: 457 Rep Power: 14	I want to pet the manifold, can I pet it?

12-21-2011, 10:16 AM	#39
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Its not quite welded yet Just tacked. We are going for a V mount set up. Its going to be interesting but I think it will work.. and also retain the hood latch Mr. Walker Morgan (from www.MPFab.com) is pretty amazing fabricator and have done some cool stuff before.. including exhaust system for my Eunos Cosmo (dolphine tip). I will keep you guys updated on the build... __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

12-21-2011, 04:15 PM	#40
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Hmmm, I'm needing to get a manifold fabricated now also. And that one looks AMAZING so far.

12-22-2011, 04:47 PM	#42
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I'll PM you, Phil. I keep forgetting you're mounting this turbo upside down, it keeps throwing me off LOL. That manifold is gorgeous.

12-22-2011, 05:03 PM	#43
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Scavenger pump in the works for that turbo setup?