RX7 Seat/Rim question!

DriFD3S · 01-03-2012, 02:18 AM

just searched the other forum, and apparently the RX8 seats CAN fit,
but, modification of the rail has to be done,
I am not sure what that means, so, if anyone has any knowledge,
please let me know.

RETed · 01-03-2012, 04:30 AM

You can me any seat fit as long you're willing to put the time, money, and effort into it.
I am not aware of anyone offering anything pre-fab, so you need to make the effort to do the custom work to make them fit.

-Ted

Prodigy · 01-04-2012, 01:05 AM

Funny, after reading this thread, I seen a 2008 ish jeep patriot rolling on stock 8 rims... Lol

I do have another picture of a Australian Time attack (local hobbiest car I believe) FD with a 787 themed paint job on painted 8 wheels...

Plus one of two pictures of Phil's silver MS FD when he put the new gen RX-8 wheels on it (the ones with little rotors in the design) other then the high offset, did not look to bad...

But I still think 17's fit the FD best...

Plus tires are hella cheaper in 17....

J.

01-03-2012, 02:18 AM	#1
DriFD3S Rotary Fanatic Join Date: Jan 2009 Location: Edmonton, AB, Canada Posts: 174 Rep Power: 0	just searched the other forum, and apparently the RX8 seats CAN fit, but, modification of the rail has to be done, I am not sure what that means, so, if anyone has any knowledge, please let me know. __________________ *Live the DriFD3S or die trying.* JDM True Story. the Vacuum line, to my MAP became detached while I was legally drifting. my engine would not rev past 2500, and idled from 300-650 and was stalling. Fortunately, I acquired a Zip-Tie. I fixed a catastrophic engine failure, With a Zip-Tie. JDM FTW.