Tegheim - Home made 4 rotor Wolvo 142 - Page 14

MaczPayne · 12-29-2011, 03:49 PM

Yeah

Tegheim · 12-29-2011, 04:55 PM

Quote:

Originally Posted by FerociousP

"

decent pricing?

LOL, sorry

Dumb swede :P

Tegheim · 12-30-2011, 10:26 AM

The other side proceed! Not the best pic though

Tegheim · 01-02-2012, 04:43 PM

MazdaMike · 01-03-2012, 03:29 PM

Whats the cost of the materials for this project at so far? Id imagine one of those gigantic metal discs costs an arm and a leg.

Tegheim · 01-05-2012, 06:58 AM

Actually each rotor-material costs 750SEK, and that is $90-100.
Quite cheep I think, as the HM-endmill of 10mm dia that I use for the pockets costs about the same

Tegheim · 01-08-2012, 08:00 AM

Built me an lightweight-engine today that is alot easier to get in and out of the car when i want to do some measurements

WE3RX7 · 01-08-2012, 08:17 PM

Sweet... how much power is that bad boy making? Biggest problem you'll have with that engine is termites...

Tegheim · 01-27-2012, 03:21 PM

A good start... at the end...?

Force13b · 01-27-2012, 05:19 PM

Quote:

Originally Posted by Tegheim

It's accually kind of fucked up that we don't have aftermarket-rotors with human prising. The piston-guys could pick and choose how ever they want. I also want that without sell my mother.

I wouldn't mind selling my mother-in-law

Quote:

Originally Posted by Tegheim

Actually each rotor-material costs 750SEK, and that is $90-100.

I think you're on to something here as far as selling rotors if you needed to.

MazdaMike · 01-27-2012, 07:48 PM

Quote:

Originally Posted by Tegheim

Actually each rotor-material costs 750SEK, and that is $90-100.
Quite cheep I think, as the HM-endmill of 10mm dia that I use for the pockets costs about the same

Wow really? Thats awesome dude its probably cause you know people lol I bet if I tried to buy that it would be more than 100 bucks.

Tegheim · 01-28-2012, 04:11 AM

No, the materials aren't the expensive. The expensive is the time in the machine.
If I would hire myself at work, my boss would charge about 1200SEK/hour, thats about 170USD/Hour...

Pete_89T2 · 01-28-2012, 08:24 AM

Quote:

Originally Posted by Tegheim

No, the materials aren't the expensive. The expensive is the time in the machine.
If I would hire myself at work, my boss would charge about 1200SEK/hour, thats about 170USD/Hour...

About how many hours of labor are involved in making one of your rotors? Out of curiosity, I checked what rotors cost at Mazdatrix. A new rotor from the Mazda factory for an FD costs about $700 US dollars; you can get one a little cheaper shopping different Mazda parts dealers, but that's a good reference number. If you & your boss can get the unit cost per rotor below that figure, you might have a great business opportunity here.

Tegheim · 02-12-2012, 11:52 AM

I don't know much hours involved, but theres a couple...
Mostly because the machine I'm working in aren't high-speed-machine.
I'm limited to 4000rpm in the spindle.

Today I worked in the wrong direction

Version6 · 02-12-2012, 03:01 PM

If it all works out like you plan and it can take a beating, you should start to produce 2 and 3 rotor engines for the consumer market.

I would gladly shell out the cash for one!

12-29-2011, 03:49 PM	#196
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	Yeah __________________ Johnson TA FC in the works!

01-03-2012, 03:29 PM	#200
MazdaMike S4 Owner Join Date: Jun 2008 Location: Tottenham, ON, Canada Posts: 48 Rep Power: 0	Whats the cost of the materials for this project at so far? Id imagine one of those gigantic metal discs costs an arm and a leg. __________________ 1985 Mazda RX7 GSL 13B, Holley etc 1997 Mazda MX6 LS - DD lowered on 17s

02-12-2012, 03:01 PM	#210
Version6 The Newbie Join Date: Feb 2012 Posts: 10 Rep Power: 0	If it all works out like you plan and it can take a beating, you should start to produce 2 and 3 rotor engines for the consumer market. I would gladly shell out the cash for one! Last edited by Version6; 02-12-2012 at 03:03 PM.

12-30-2011, 10:26 AM	#198
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	The other side proceed! Not the best pic though

01-02-2012, 04:43 PM	#199
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15

01-05-2012, 06:58 AM	#201
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Actually each rotor-material costs 750SEK, and that is $90-100. Quite cheep I think, as the HM-endmill of 10mm dia that I use for the pockets costs about the same

01-08-2012, 08:00 AM	#202
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Built me an lightweight-engine today that is alot easier to get in and out of the car when i want to do some measurements

01-08-2012, 08:17 PM	#203
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Sweet... how much power is that bad boy making? Biggest problem you'll have with that engine is termites...

01-27-2012, 03:21 PM	#204
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	A good start... at the end...?

01-28-2012, 04:11 AM	#207
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	No, the materials aren't the expensive. The expensive is the time in the machine. If I would hire myself at work, my boss would charge about 1200SEK/hour, thats about 170USD/Hour...

02-12-2012, 11:52 AM	#209
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	I don't know much hours involved, but theres a couple... Mostly because the machine I'm working in aren't high-speed-machine. I'm limited to 4000rpm in the spindle. Today I worked in the wrong direction