Twin Pump Assembly Sale Thread

oorx7 · 04-15-2008, 04:07 PM

Sorry, I didn't respond sooner. The new parts are being machined now. They should go out tommarrow. We had to order a couple of things to make this go as smoothly as possible. In other words, you will not have to modify any thing, just swap out the old with the new.

We will be providing you with new threaded rod, new aluminum stantions, and a new leval sensor bracket. We will ask that you ship the stuff back that you replace. Because it can still be used for the Walboro assemblies.

Thanks for your patience,
Brandon

13bmaniac · 04-16-2008, 03:05 PM

Sounds Good Just Let Us Know When You Ship The Assembly.
Thanks

13bmaniac · 04-21-2008, 11:41 AM

nothing yet guys???

phunk · 04-21-2008, 11:48 PM

they are done. the tank flange bolts should be here tomorrow. they will be leaving this week, finally!

thanks for the patience everyone, just needed to make the adjustments to reduce frustrations while installing... its still tight, but its not too bad!

oorx7 · 04-22-2008, 09:06 AM

Figured I would take some pics of one. You will need to put the pumps in side the tank then attach the level sensor assembly to the top of the pump assembly.

We were using a local provider for our hardware, that is not living up to our needs. We have decided to change vendors. It will cost us a little more but don't worry it won't be reflected in the price.

Again thanks for your patience,
Brandon

13bmaniac · 04-25-2008, 01:40 PM

hello my friends i just receive your email with the tracking and intruction to install the sistem, i just woderin if you also included intsall intruction with the sistem, also i think you should do a graphic write up with images about instalation.
thanks

BNA_ELLIS · 04-25-2008, 03:01 PM

Brandon do you have any personal recommendations for a sock to use with these pumps?

rgds
Brian

04-22-2008, 09:06 AM	#5
oorx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	Figured I would take some pics of one. You will need to put the pumps in side the tank then attach the level sensor assembly to the top of the pump assembly. We were using a local provider for our hardware, that is not living up to our needs. We have decided to change vendors. It will cost us a little more but don't worry it won't be reflected in the price. Again thanks for your patience, Brandon Last edited by oorx7; 04-22-2008 at 09:09 AM.

04-15-2008, 04:07 PM	#1
oorx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	Sorry, I didn't respond sooner. The new parts are being machined now. They should go out tommarrow. We had to order a couple of things to make this go as smoothly as possible. In other words, you will not have to modify any thing, just swap out the old with the new. We will be providing you with new threaded rod, new aluminum stantions, and a new leval sensor bracket. We will ask that you ship the stuff back that you replace. Because it can still be used for the Walboro assemblies. Thanks for your patience, Brandon

04-16-2008, 03:05 PM	#2
13bmaniac Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	Sounds Good Just Let Us Know When You Ship The Assembly. Thanks

04-21-2008, 11:41 AM	#3
13bmaniac Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	nothing yet guys???

04-21-2008, 11:48 PM	#4
phunk The Newbie Join Date: Mar 2008 Posts: 23 Rep Power: 0	they are done. the tank flange bolts should be here tomorrow. they will be leaving this week, finally! thanks for the patience everyone, just needed to make the adjustments to reduce frustrations while installing... its still tight, but its not too bad!

04-25-2008, 01:40 PM	#6
13bmaniac Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	hello my friends i just receive your email with the tracking and intruction to install the sistem, i just woderin if you also included intsall intruction with the sistem, also i think you should do a graphic write up with images about instalation. thanks

04-25-2008, 03:01 PM	#7
BNA_ELLIS The Newbie Join Date: Apr 2008 Posts: 1 Rep Power: 0	Brandon do you have any personal recommendations for a sock to use with these pumps? rgds Brian