Norwegian S4 Base TII

Luthor · 02-09-2012, 10:17 AM

Ok =) Well, best of luck with your build, I'm subscribed.

Pettersen · 02-11-2012, 06:06 PM

Got the T2 engine up on the work bench and have begun tearing it down to the shortblock. Didn't get alot done, but it's a start atleast.

Pettersen · 03-19-2012, 01:40 PM

So, started on a new rear muffler. I hope it will be a tad better than the straight thru ones.

Pettersen · 04-05-2012, 05:33 PM

Teared down the t2 block, and ordered a rebuild kit.

Pettersen · 04-08-2012, 05:13 PM

Finished the rear muffler, and put in a pipe silencer. So it's less noisy, wich means it's fun to drive long trips, not tiresome cause of the noise

Also i found the stock fuel pump in a parts pile and decided to use it and some other misc parts to make a parts cleaner.

Mocked up the engine with the semi pp housings, looking forward to getting the rebuild kit so i can reassemble the engine and get it in the car and have some fun with it.

02-09-2012, 10:17 AM	#1
Luthor FirstGen owner Join Date: Feb 2012 Location: Norway Posts: 30 Rep Power: 0	Ok =) Well, best of luck with your build, I'm subscribed. __________________ 1980 RX-7 powered by: Half-bridge S5 TII13bt+TII tranny, Precision 72mm, Autronic SM4+500CDI, Water inject++.

02-11-2012, 06:06 PM	#2
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Got the T2 engine up on the work bench and have begun tearing it down to the shortblock. Didn't get alot done, but it's a start atleast.

03-19-2012, 01:40 PM	#3
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	So, started on a new rear muffler. I hope it will be a tad better than the straight thru ones.

04-05-2012, 05:33 PM	#4
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Teared down the t2 block, and ordered a rebuild kit.

04-08-2012, 05:13 PM	#5
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Finished the rear muffler, and put in a pipe silencer. So it's less noisy, wich means it's fun to drive long trips, not tiresome cause of the noise Also i found the stock fuel pump in a parts pile and decided to use it and some other misc parts to make a parts cleaner. Mocked up the engine with the semi pp housings, looking forward to getting the rebuild kit so i can reassemble the engine and get it in the car and have some fun with it.