FPR Kits?

[Raksj04]

No emissions, It is a JDM motor. I have larger secondries, running Rtek 2.1. I ditched the PD a while ago. I am also willing to change the fuel lines because I sometimes smell fuel but I have yet to see a leak.

[rotorlips]

ok. this is quite simple then . grab some braided -6 line for the fuel. you can get the fittings from jegs or summit that will screw right into both factory rails .makes for a nice clean install . braided line will go right to fuel filter and fuel return. get an sx engineering regulator 1:1 ratio for boosted motor. set pressure same as stock . youll be good to go. stock rails are quite good so no need to worry there .hope that helps. used many systems like this on many 2nd gens.

[FerociousP]

Originally Posted by rotorlips

ok. this is quite simple then . grab some braided -6 line for the fuel. you can get the fittings from jegs or summit that will screw right into both factory rails .makes for a nice clean install . braided line will go right to fuel filter and fuel return. .

-6 braided line is 3/8" ID. You shouldn't be just clamping it down on a 5/16" fuel filter outlet. For the return you don't need to change the hose (or at least spend money on expensive hose) because there is no pressure.