![]() |
#61 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
passenger side engine mount pretty much done. Also a pic of the issues i have with the subaru top mount.
[IMG]http://i1089.photobucket.com/albums/i352/WhizbangRally/Rx7%20Rally%20Car/IMG _9564.jpg[/IMG] ![]() ![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#62 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
driver's side mount is mocked up! Perfect clearance with the steering quickener. Tomorrow ill get the metal to mount the quickener and finish the steering! Then i just need to do the trans mount, then i can pull the engine and finish weld.
![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#63 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Finally got the FB tops onto the coilovers! Good news is they clear! I also got the ARP studs onto the five lug hugs. Assembled the whole shebang with calipers and the wheel to see if everything clears. Looks perfect. Huge amounts of clearance!!!
I also removed the engine and finish welded the mount brackets. Added supports for the driver's side. The mount for steering quickener was made and welded too. Finished welding the steering adapters as well. ![]() ![]() ![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#64 |
Rotary Fan in Training
Join Date: Mar 2008
Location: Spartanburg SC.
Posts: 70
Rep Power: 18 ![]() |
what type of studs did you use I need some for my car the ones I have are nowhere near long enough with my new wheels
|
![]() |
![]() |
![]() |
#65 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Studs were from summit racing. Part number was ARP-100-7713
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#66 |
Professional Stick Poker
Join Date: Feb 2011
Location: Stafford, Ks.
Posts: 1,012
Rep Power: 16 ![]() |
MazdaTrix also has longer studs. The Summit ones are probably cheaper though. Great build, I like seeing something different and this is definitely different. Want to hear how it all works and what kind of alignment and suspension settings you get with this setup when you're done.
__________________
1988 N/A SE 2+2, dead stock and staying that way. ![]() 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585 |
![]() |
![]() |
![]() |
#67 |
Rotary Fan in Training
Join Date: Mar 2008
Location: Spartanburg SC.
Posts: 70
Rep Power: 18 ![]() |
yeah mazdatrix is smoking something with some of theyr prices the ones I need they want 19 bucks per stud so times 16 I say fuck that.
|
![]() |
![]() |
![]() |
#68 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Car is on the ground. need to adjust the ride height and add some weight to order helper springs.
![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#69 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Some more pics.
Managed to make the pin mounts for the rear hatch. Also, trimmed the fenders for tire clearance since the axle line moved forward. Also, also, mounted the Saab 900 radiator and the intercooler. Used square tube and some flat steel on the bottom, then aluminum on the top. Clutch line is done. Brakes are getting there. I need some odd ball fitting for the input to the Wilwood cylinder. Going to clean and prep the inside of the car here soon so i can paint the inside after filling holes and just plain old age and wear. Then the fuel lines and brakes lines will be mounted permanently in the cabin and the electrical can begin. ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#70 |
RCC Loves Me Not You
Join Date: Mar 2008
Location: Colorado Springs, CO
Posts: 2,089
Rep Power: 20 ![]() |
Looks good man, quality stuff.
When are you moving back to CO? LOL |
![]() |
![]() |
![]() |
#71 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Honestly man, not sure what the hell is going on. I have probably a year left of being in limbo, then there is an issue with my home of record so as far as where I can afford to move...
anywho. painted the cage green. Seats back in! ![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#72 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Made the fuel pump holder thingy. Need to buy another Walbro however...
![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#73 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Fitted the studs for the pump plate, mounted the fuel filter, and start to size the -6AN lines in for the fuel array. Summit (Russell) brand hoses are living nightmare to assemble and I will only buy Earls (Jegs) next time. Going to mark and measure and pay a place in town to deal with assembling those things.
Also, most of the brakes lines are done. need a Master Cylinder to bias line, and a line to go to the axle that is flexible. Also I mounted the foot switch for the horn on the co-driver foot rest. A similar switch will go on the other side for wipers/sprayer activation. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#74 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
Well the car is making progress. Only cell pics at the moment. Better pictures to come later. Fuel lines are mostly ran, wiring is getting there, various engine bits are wrapping up, megasquirt should be finished up soon enough. Going to start painting the car probably on the 15th.
![]() ![]() ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#75 |
RCC Addict
Join Date: Feb 2008
Location: VA
Posts: 1,812
Rep Power: 19 ![]() |
Looking pretty good man. Lots of hard work in there and I'm sure you'll have a good reliable run for rally..
|
![]() |
![]() |
![]() |
Bookmarks |
|
|