Tegheim - Home made 4 rotor Wolvo 142

Tegheim · 07-18-2012, 03:03 PM

Came up with an new idea about the Camber-adjustment. Simple to adjust with only one tool, and no need for deassembly anything around it.

4pc Ø30mm steel.
Did not have the possibility to use the CNC-lathe tonight, so it has been some therapy in the manual lathe.
M20x1.5 thread for streanght and good adjustments.

RICE RACING · 07-18-2012, 04:32 PM

You are a bad boy holding black steel in the three jaw!!!!

07-18-2012, 04:32 PM	#2
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	You are a bad boy holding black steel in the three jaw!!!! __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

07-18-2012, 03:03 PM	#1
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Came up with an new idea about the Camber-adjustment. Simple to adjust with only one tool, and no need for deassembly anything around it. 4pc Ø30mm steel. Did not have the possibility to use the CNC-lathe tonight, so it has been some therapy in the manual lathe. M20x1.5 thread for streanght and good adjustments.