Rear Hatch Fire Extinguisher Mount PREVIEW

[Mazdabater]

The boot is a terrible spot for an extinguisher, it should be in arms reach because if my cars on fire I don't want to have to be opening the boot and running to the back of the car first.

[JhnRX7]

Originally Posted by Mazdabater

The boot is a terrible spot for an extinguisher, it should be in arms reach because if my cars on fire I don't want to have to be opening the boot and running to the back of the car first.

Agreed. They already sell a seat mount that mounts to the OEM passenger seat and can be easily accessed while sitting in the drivers seat. Unfortunalely, that option only works if you still have OEM seats.

http://www.sakebombgarage.com/fd3s-f...***-oem-seats/

The trunk mount is an alternative if you have aftermarket seats and dont have a roll cage, or it could be used to hold a second extinguisher.

[SBGarage]

Originally Posted by Mazdabater

The boot is a terrible spot for an extinguisher, it should be in arms reach because if my cars on fire I don't want to have to be opening the boot and running to the back of the car first.

Originally Posted by JhnRX7

Agreed. They already sell a seat mount that mounts to the OEM passenger seat and can be easily accessed while sitting in the drivers seat. Unfortunalely, that option only works if you still have OEM seats.

The trunk mount is an alternative if you have aftermarket seats and dont have a roll cage, or it could be used to hold a second extinguisher.

What he said ^ Below is what our passenger seat mount looks like installed. The seat retains it's full range of motion and does not interfere with passengers legs.

Accessing the extinguisher in the rear hatch should only add a few seconds to the process. We will be making videos to demonstrate removal of each with a timer.

[FC Zach]

Is that a seat mount on a 2nd gen in the above picture?

[Prodigy]

no its not, 3rd gen LHD, passenger side


J.

[SBGarage]

Originally Posted by FC Zach

Is that a seat mount on a 2nd gen in the above picture?

As prodigy said it's for the 3rd gen. We are working on a few solutions for 2nd gen guys though

Update time!
The prototype rear hatch mount is complete! A few tweaks are needed then its off to production! Stay tuned for pre-release sale prices. We'll also post pictures with the mounting points exposed.




-Dan