Bolt pattern for REPU axle?

mazpower · 04-24-2013, 05:41 PM

I'm going to start working on my '71 R100 drag project that's been sitting since I picked it up in '08...it has a REPU rear axle on it with 6 lug drag wheels. I'd like to put something a little more narrow on the back for driving it around town. What are my wheel options and what's the pattern on the 6 lug axle? Is it similar to the Nissan 6 bolt stuff?

Rotary Evolution · 04-24-2013, 05:49 PM

iirc it is 6X140mm, some newer 6X5.5" lug wheels also fit but the center hub is larger than most newer wheels. i know that the early 2000's toyota 6 lug trucks have the same pattern but i never got around to test fitting any wheels.

this thread may be of some help:
http://www.mazdarepu.com/board/viewt...?FID=8&TID=758

mazpower · 04-24-2013, 06:07 PM

Thanks!

djmtsu · 04-25-2013, 07:14 AM

See a lot running Nissan wheels around here (not just REPU, but older B series trucks) or the old standby, knock off Escalade/Denali wheels.

jfaplanet · 04-25-2013, 03:47 PM

B series trucks up to 93, Nissan or Datsun trucks with 6 lug, Ford Courier up to when they started making them like Rangers, Some 4 wheel drive Chevy's, Toyota 4 wheel drive.

Hope this helps your search.

04-24-2013, 05:41 PM	#1
mazpower Rawr Bearclaw Join Date: Feb 2008 Location: The Souf Posts: 197 Rep Power: 18	Bolt pattern for REPU axle? I'm going to start working on my '71 R100 drag project that's been sitting since I picked it up in '08...it has a REPU rear axle on it with 6 lug drag wheels. I'd like to put something a little more narrow on the back for driving it around town. What are my wheel options and what's the pattern on the 6 lug axle? Is it similar to the Nissan 6 bolt stuff? __________________ Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com

04-24-2013, 05:49 PM	#2
Rotary Evolution rotaryevolution.net Join Date: Feb 2011 Location: Las Vegas, NV Posts: 248 Rep Power: 15	iirc it is 6X140mm, some newer 6X5.5" lug wheels also fit but the center hub is larger than most newer wheels. i know that the early 2000's toyota 6 lug trucks have the same pattern but i never got around to test fitting any wheels. this thread may be of some help: http://www.mazdarepu.com/board/viewt...?FID=8&TID=758 __________________ http://rotaryevolution.net Last edited by Rotary Evolution; 04-24-2013 at 05:54 PM.

04-24-2013, 06:07 PM	#3
mazpower Rawr Bearclaw Join Date: Feb 2008 Location: The Souf Posts: 197 Rep Power: 18	Thanks! __________________ Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com

04-25-2013, 07:14 AM	#4
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	See a lot running Nissan wheels around here (not just REPU, but older B series trucks) or the old standby, knock off Escalade/Denali wheels. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

04-25-2013, 03:47 PM	#5
jfaplanet Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN Posts: 134 Rep Power: 18	wheels B series trucks up to 93, Nissan or Datsun trucks with 6 lug, Ford Courier up to when they started making them like Rangers, Some 4 wheel drive Chevy's, Toyota 4 wheel drive. Hope this helps your search. __________________ 74 REPU Red 74 REPU (turbo project) 74 Ford Courier vert/rotary 79 RX-7 red & black 04 Nordic Green RX-8 Maybe I have a Rotary Problem!