Heater Fan Does Not Turn On - Page 2

vex · 04-25-2013, 04:43 PM

Quote:

Originally Posted by Rotary Evolution

most likely it is the relay or the blower motor resistor(never had to check one so i can't comment on where it would be).

I know where the resister is (right next to the motor in case you ever have a need/desire to find it--Look for a plastic case...unless that was a diode and I just didn't realize it). I even checked the resistance there... but since I don't have the numbers to verify if it's still good or not I can't tell. I think my memory is gone.

Rotary Evolution · 04-25-2013, 05:21 PM

foxed.ca has all the wiring diagrams and circuit test procedures.

vex · 04-25-2013, 05:47 PM

Looking at the diagram now, but doesn't list values for the resistor (I didn't see it on the FSM section relating to the blower motor either--though I'll look again).

Looks like I didn't find the resistor... I'll need to pull the entire blower unit/housing to access that. Guess I'll do that tomorrow/saturday.

04-25-2013, 05:21 PM	#17
Rotary Evolution rotaryevolution.net Join Date: Feb 2011 Location: Las Vegas, NV Posts: 248 Rep Power: 15	foxed.ca has all the wiring diagrams and circuit test procedures. __________________ http://rotaryevolution.net

04-25-2013, 05:47 PM	#18
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	Looking at the diagram now, but doesn't list values for the resistor (I didn't see it on the FSM section relating to the blower motor either--though I'll look again). Looks like I didn't find the resistor... I'll need to pull the entire blower unit/housing to access that. Guess I'll do that tomorrow/saturday. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group Last edited by vex; 04-25-2013 at 07:56 PM.