Rx-2 suspension modifications?

Whizbang · 05-10-2013, 05:01 PM

well right now i am eyeing up making something a little more.... oddball

My FB has an FC subframe since they are the same width for mounting. The rx7 has about 5 more inches of width between the inner unibody frame thats in the engine bay. So i am considering making brackets to mount and hold an FC subframe which grants me modernish suspension, brakes, steering, blah blah blah.

The rear... GSLSE axle since i have spares laying around, and if i want to run the 5 lug moser axles, if not, ill do the aaron cake 4 lug w/ 4 piston calipers adapter thingy. So with the front track width and the rear not being cut down, ill plan to run some aggressively sized over-flares.

05-10-2013, 05:01 PM	#6
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	well right now i am eyeing up making something a little more.... oddball My FB has an FC subframe since they are the same width for mounting. The rx7 has about 5 more inches of width between the inner unibody frame thats in the engine bay. So i am considering making brackets to mount and hold an FC subframe which grants me modernish suspension, brakes, steering, blah blah blah. The rear... GSLSE axle since i have spares laying around, and if i want to run the 5 lug moser axles, if not, ill do the aaron cake 4 lug w/ 4 piston calipers adapter thingy. So with the front track width and the rear not being cut down, ill plan to run some aggressively sized over-flares. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook