Triple Gauge Pods For Sale!

IR Performance · 05-15-2008, 09:25 AM

The pics was sent to me from my manufacturer. The design is NOT copied from the original piece. I did not even provide my manufacturer one of your pods to duplicate. Sure the idea is not new, but it has been done before by many Japanese manufacturers.The individual pieces are cast from molds, not from pvc elbows like some other manufacturers use. Before you accuse me of copying or stealing pictures, get your facts straight. Have a nice day.

Flyrx7 · 05-15-2008, 10:23 AM

Alright, fine. If you want facts, then explain to me why my manufacturing stamp is clearly visible in post #4 (halfway between the center set-screw and the right clip). That stamp is on every pod I make. It is a 3 leaf clover or club, if you will.
That and the machining mark from the tooling of the CNC router is clearly noticeable on the baseplate (bottom right, in the lip, round circle), that is also on every one of my baseplates. If, as you say, your pods were molded, I don't think you would have machining marks.

Let's also get something else straight; I'm not accusing you of stealing or copying 'pictures' as you state, I could care less, but posting pictures of a pod I manufactured and claiming it as your own. That's false advertising.

So, either your manufacturer is duping you or someone is lying.
Maybe you should get your facts straight.

Like I said, I didn't come here to hijack, but if you profess that what is in those pics is indeed the pods you are offering then I'm going to have to disagree.

Regards,
Frank

05-15-2008, 09:25 AM	#1
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	The pics was sent to me from my manufacturer. The design is NOT copied from the original piece. I did not even provide my manufacturer one of your pods to duplicate. Sure the idea is not new, but it has been done before by many Japanese manufacturers.The individual pieces are cast from molds, not from pvc elbows like some other manufacturers use. Before you accuse me of copying or stealing pictures, get your facts straight. Have a nice day. Last edited by IR Performance; 05-15-2008 at 09:30 AM.

05-15-2008, 10:23 AM	#2
Flyrx7 Rotary Fanatic Join Date: May 2008 Location: WA State Posts: 168 Rep Power: 18	Alright, fine. If you want facts, then explain to me why my manufacturing stamp is clearly visible in post #4 (halfway between the center set-screw and the right clip). That stamp is on every pod I make. It is a 3 leaf clover or club, if you will. That and the machining mark from the tooling of the CNC router is clearly noticeable on the baseplate (bottom right, in the lip, round circle), that is also on every one of my baseplates. If, as you say, your pods were molded, I don't think you would have machining marks. Let's also get something else straight; I'm not accusing you of stealing or copying 'pictures' as you state, I could care less, but posting pictures of a pod I manufactured and claiming it as your own. That's false advertising. So, either your manufacturer is duping you or someone is lying. Maybe you should get your facts straight. Like I said, I didn't come here to hijack, but if you profess that what is in those pics is indeed the pods you are offering then I'm going to have to disagree. Regards, Frank