IV-Rotor Build: 12 plugs/ 9 bearings/ 8 ports = 1 monster

GtoRx7 · 06-09-2013, 09:06 PM

The famous n/a 3-rotor weight (same type 5.5" clutch, waterpump, lightweight flywheel etc. ) Impressive at 279lbs.

With t-5 dogbox tranny is at a low 376lbs.

And here is the assembled 4-rotor, 285 lbs. 6lb increase over race 20b.

And also weight with ultra heavy duty mid valley transmission. Still only 7lbs heavier.

GtoRx7 · 06-09-2013, 09:11 PM

There are still some temporary items on the setup, like the oil lines, unwrapped harness etc. But its getting very close.

GtoRx7 · 06-09-2013, 09:22 PM

For the new guys, here is what the car looks like.

06-09-2013, 09:06 PM	#1
GtoRx7 Rotary Fanatic Join Date: Jul 2008 Posts: 151 Rep Power: 18	The famous n/a 3-rotor weight (same type 5.5" clutch, waterpump, lightweight flywheel etc. ) Impressive at 279lbs. With t-5 dogbox tranny is at a low 376lbs. And here is the assembled 4-rotor, 285 lbs. 6lb increase over race 20b. And also weight with ultra heavy duty mid valley transmission. Still only 7lbs heavier. __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

06-09-2013, 09:11 PM	#2
GtoRx7 Rotary Fanatic Join Date: Jul 2008 Posts: 151 Rep Power: 18	There are still some temporary items on the setup, like the oil lines, unwrapped harness etc. But its getting very close. __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

06-09-2013, 09:22 PM	#3
GtoRx7 Rotary Fanatic Join Date: Jul 2008 Posts: 151 Rep Power: 18	For the new guys, here is what the car looks like. __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp