Stredrotor's RX4 Coupe * Project 20B *

Stredrotor · 06-14-2013, 02:45 AM

Ok a bit of an update!

Here's my latest investment...

Tremec TKO 600 5 speed with Carbon Syncros, Brass fork pads and with an Ultimate Street short throw shifter, Quarter Master Hydraulic bearing, slip yoke for the tailshaft, a Direct Clutch twin plate, and a Green Brothers steel bell housing.

I have to do a little mod to the box to suit the RX7 turbo starter and fabricate a gearbox cross member, I will detail this later.

06-14-2013, 02:45 AM	#11
Stredrotor Rotary Fan in Training Join Date: Nov 2009 Location: Tasmania, Australia Posts: 53 Rep Power: 16	Ok a bit of an update! Here's my latest investment... Tremec TKO 600 5 speed with Carbon Syncros, Brass fork pads and with an Ultimate Street short throw shifter, Quarter Master Hydraulic bearing, slip yoke for the tailshaft, a Direct Clutch twin plate, and a Green Brothers steel bell housing. I have to do a little mod to the box to suit the RX7 turbo starter and fabricate a gearbox cross member, I will detail this later. __________________ RX4 coupe 20B conversion http://www.rotarycarclub.com/rotary_...ead.php?t=9884