Whizbang's RX-2

Whizbang · 07-20-2013, 06:27 PM

Here is progress from today and last night. Most of what i wanted for reinforcement is done. Just need more finishing welding, then some metal for the frame rails underneath that i had to cut for clearance. Ill probably get OCD and file the welds so everything that i can reach will look nice and rounded. I also got a manual rack and It seems like i can use the stock steering with the FC intermediate shaft. I just had to clock the steering a bit to clear.

The pics below are not fully assembled just because i was still messing with fitment. The steering is like 1 degree from going right in. I might just clock a little more and be good.

07-20-2013, 06:27 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	Here is progress from today and last night. Most of what i wanted for reinforcement is done. Just need more finishing welding, then some metal for the frame rails underneath that i had to cut for clearance. Ill probably get OCD and file the welds so everything that i can reach will look nice and rounded. I also got a manual rack and It seems like i can use the stock steering with the FC intermediate shaft. I just had to clock the steering a bit to clear. The pics below are not fully assembled just because i was still messing with fitment. The steering is like 1 degree from going right in. I might just clock a little more and be good. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook