Quote:
Originally Posted by RedR1
|
I did mine because I used the FC harnesses when I did the engine/trans/fuel system swap. I figured it was probably easier and more reliable to just plug in the stock cluster. The extra gauges were a nice benny.
I don't know how others have done this swap, but mine took a fair amount of fabrication to pull off. Nothing extreme, but a bit of a pain nonetheless. I had to use angle pieces off the support beam in the dash to make mounts for the FC cluster mounts. I had to trim and glue the facing from the FC bezel to the SA surround to pull it off.
I was wishing that I had used the S5 cluster after I finished it, much better looking cluster IMO. The cluster is a right pain in the a** to get in and out now though, not that it wasn't before.
08-09-2013, 09:16 AM
Hybrid Mode
