Got 5 coats of wax on the mold. I'll probably do two more for the maximum recommendation of 7. I'd still like to find some aerosol PVA or something similar. Can you tell I'm worried the fiberglass shroud is going to stick to the mold? In between coats of wax I started screwing with the front of the car in more preparation for the ducting.
The hood latch and cable have been completely removed. I've got a set of Aerocatch hood pins on the way to replace everything. I've also cut off all the random brackets on the oil cooler support bar for better airflow to the radiator. I still need to smooth down the cuts.
08-12-2013, 09:23 AM
Hybrid Mode
