FS: Big under-hood sale + a few random parts, $15-$425 or $650 for all.

[Ender]

Front iron*: $65 + shipping
Middle iron: $70 + shipping
Rear iron: $70 + shipping
PACKAGE DEAL: all three irons for $220 SHIPPED!

*Front iron is missing one pump bolt, however I have it and will send it with it, but IIRC the threads are damaged on one end. The bolt is pictured in a box of parts. Finding some suitable all-thread or other suitable replacement should be fairly cheap.

Good housing: $90 + shipping
Bad housing: $15 + shipping; firm, because I'd rather keep it for demo purposes than sell it for less

Eccentric shaft (looks like it's in great condition, and the rotor/stat gear bearings agree with that): $80 + shipping
Rear stat gear: $60 shipped
Front stat gear: $50 shipped
New OEM stat gear bearing (1): $20 shipped
New OEM rotor gear bearing (1): $20 shipped

One complete set of S4 TII tension bolts: $50 shipped

Good rotor: $107 shipped.
Bad rotor stays with me.

Oil pan: $45 shipped
Flywheel: $20 + shipping
Pressure plate: $50 shipped
If you want the old clutch disc: $15 + shipping or add $15 to some other order and I'll send it with it. If it were me though, I wouldn't want the clutch.
I may have the old throwout bearing if anyone would be interested.

Knock sensor: $25 shipped
Oil pressure sender (works): $30 shipped
Front hub: $20 shipped, read note on picture
Gaskets pictured with front hub/knock sensor/OPS, they are new and unused except for the black one at the top: $20 shipped

Water pump pulley: $20 shipped
New unused UIM-LIM gaskets: $15 shipped
Dual alt belt pulley: $25 shipped

Small box of some side seals/springs including water temp sensor: $15 shipped, add cold start pump motor for $5

S4 TII CAS: $30 shipped
BAC solenoid from an NA FC, not sure if they are the same between NA & TII (not the BAC valve, in the picture it's next to the CAS): $20 shipped
Fuel level sender, no hardware: $20 shipped
OMP vac spider splitter, looks a little warped, but I believe it works properly: $10 shipped
Molded coolant hose pictured next to tape measure, I don't remember exactly where it goes, but I know it's for the TII: $15 shipped

Front cover: $40 + shipping
Oil pump, moderate condition: $40 shipped
Front counterweight: $40 shipped

Bag full of emissions parts and parts removed during the TB mod: $25 shipped
Cold start reservoir: $17 shipped
Single alt belt pulleys: $12 shipped for both pairs, or $11 shipped per pair
Rat's nest, two pieces: $23 shipped
Long solid vac line (I think it has to do with the charcoal canister): $25 shipped (it's so long most of that $25 would probably go to shipping costs)
Fender molding + lens mount/cover/screws: $25 shipped (I think it's for the passenger side)
NA BAC valve: $20 shipped
Jack handle, made of aluminum, it is bent but should serve its purpose: $12 shipped
Solid thermal pellet: $13 shipped
Two brackets, I think alt brackets, but I'm not even sure which models of FC they each came from; please don't ask me to find out as it's not worth my time: $13 shipped for both, $12 shipped each
Flywheel nuts, I have a few of them: $13 shipped each or add $7 to an order

Remember, just about everything is OBO and I need to move some stuff and make some money quickly. I also have a number of Torrington bearings, thrust plates, end spacers and other small parts. Let me know if you need anything and I'll try to work something out with you.

**OR** I will sell EVERYTHING specifically listed for $650 SHIPPED!
--Which reminds me, if a mod could change the title of the thread to reflect that total ($650) I would appreciate it. I didn't think far enough ahead for the title.

I use paypal primarily, but I will accept money orders or checks, the payment just needs to clear before I ship out. PM me for my paypal name, you can post offers here or via PM, whichever you prefer.