starts occasionally, just dies

Whizbang · 11-15-2013, 06:10 PM

ill have to do the visual test on the injectors perhaps. I was using an ohm meter to see them being "triggered" by the ecu while cranking / running.

fuel pressure seems alright, even tried two different regulators.

She is getting a "little" better after connecting the B/L wire from FEM-03 of the ecu to the circuit opening relay. runs and almost reved with the throttle, but is still dying. pretty quickly.

redid the base timing at the CAS as well. Used the yellow painted notch on the crank pulley for leading.

can not find any grounds i've missed.

11-15-2013, 06:10 PM	#3
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	ill have to do the visual test on the injectors perhaps. I was using an ohm meter to see them being "triggered" by the ecu while cranking / running. fuel pressure seems alright, even tried two different regulators. She is getting a "little" better after connecting the B/L wire from FEM-03 of the ecu to the circuit opening relay. runs and almost reved with the throttle, but is still dying. pretty quickly. redid the base timing at the CAS as well. Used the yellow painted notch on the crank pulley for leading. can not find any grounds i've missed. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook