|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
|
Thread Tools | Display Modes |
|
|
11-18-2013, 02:21 PM
|
#1 |
|
rotaryevolution.net
Join Date: Feb 2011
Location: Las Vegas, NV
Posts: 248
Rep Power: 15  |
it runs up by the thermostat housing, behind the alternator, to the inside of the oil filler neck around the driver side of the engine and terminates at the rear of the lower intake manifold.
all the connectors should be in their appropriate locations with that routing, the rats nest goes on after the harness is loosely laid out and connected afterwards.
__________________
http://rotaryevolution.net |
|
|
|
| Bookmarks |
|
|
Hybrid Mode
