Car won't start

***TitaniumTT*** · 12-17-2013, 05:25 PM

Yes... walblows are the worst pump you can put into a rotary.... just throw that thing out and get a denso replacement pump and be happy....

As far as I can tell, and Ted agrees, there's two things to check here.... proper fuel pressure, and if the injectors are actually firing....

Also,..,.. I noticed that you said compression was 90psi..... how did you test this? If your tested it with a piston engine compressor without removing the Schrader valve... you could have 2 blown rotors and not know it....

jahjahsqc · 12-17-2013, 07:17 PM

Quote:

Originally Posted by TitaniumTT

Yes... walblows are the worst pump you can put into a rotary.... just throw that thing out and get a denso replacement pump and be happy....

As far as I can tell, and Ted agrees, there's two things to check here.... proper fuel pressure, and if the injectors are actually firing....

Also,..,.. I noticed that you said compression was 90psi..... how did you test this? If your tested it with a piston engine compressor without removing the Schrader valve... you could have 2 blown rotors and not know it....

Well, only the cylinder #1 injector is firing, injector bank 2 is not. Gonna swap an injector from the secondary row, but got tired of messing with it tonight.

Nope, I read on it before testing, pulled the schrader valve it bounced up to 90 psi. I figured that wasn't too bad for a motor thats sit for a year or more.

12-17-2013, 05:25 PM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yes... walblows are the worst pump you can put into a rotary.... just throw that thing out and get a denso replacement pump and be happy.... As far as I can tell, and Ted agrees, there's two things to check here.... proper fuel pressure, and if the injectors are actually firing.... Also,..,.. I noticed that you said compression was 90psi..... how did you test this? If your tested it with a piston engine compressor without removing the Schrader valve... you could have 2 blown rotors and not know it.... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**