Just Replaced The Engine Harness

IR Performance · 06-02-2008, 12:37 PM

Nice to see that some people take the right steps to do things right. There are 3 main reasons these harnesses go bad: 1. excessive heat. A vented hood and fan mod helps a great deal. 2. Poor quality wiring with no heat shielding to begin with. I would take the time and wrap a new harness with something like the silver harness tape available from DEI. 3. Oil and other fluids spilling onto the wiring and deteriorating them. Fix your leaks!

06-02-2008, 12:37 PM	#1
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	Nice to see that some people take the right steps to do things right. There are 3 main reasons these harnesses go bad: 1. excessive heat. A vented hood and fan mod helps a great deal. 2. Poor quality wiring with no heat shielding to begin with. I would take the time and wrap a new harness with something like the silver harness tape available from DEI. 3. Oil and other fluids spilling onto the wiring and deteriorating them. Fix your leaks!