Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

[RENESISFD]

There is IIRC 5 refrence points. so I did the calibration using a spread of temps I think the temp sensor would see. (EX. 30 degrees to 250 degrees F) to get the best resolution at the temps I would normally see. It may not be perfect but IMO it is close enough.

[TitaniumTT]

Originally Posted by RENESISFD

We have a problem..... be a man and get rid of that turbo drain HOSE and make it a hardline. Come on, if you are gonna do it, you might as well do it right. I should not have to tell you these things

Oh shit! REALLY?!?! I thought about it... but in the end decided against it for a number of reasons. 1 being I can't get the turbo separated from the mani while in the car. So I need to pull them as a unit and it BARELY fits. Plus it's easier to work with. I did order the correct color fitting and some heat sleeving though

Originally Posted by RENESISFD

I like the tubing clamp. What is your source for them?

Cheers. I get them through Verocious and Summit and Goodridge. Mainly through Verocious though.... I ordered a bunch for my boost lines to the WG. Swappinga few fittings on the WG's then first order of business when I get back is the WG lines themselves.... soooo I Should probably order my valves from MSC today....

Originally Posted by RENESISFD

Also, regarding your discolored wastegate... were they always water cooled or did you add that at a later date? Mine have like 6k mi. and a track day and are not discolored like that at all.

They've never been watercooled before. I'm doing it BECAUSE of that discoloration.

Originally Posted by RENESISFD

For Diff and trans temp sensor I used the simple AEM temp sensor http://www.lms-efi.com/sunshop/index...t_detail&p=146

Kewl, thanks... I'll check into the MoTeC software when I get back.

Originally Posted by RENESISFD

There is IIRC 5 refrence points. so I did the calibration using a spread of temps I think the temp sensor would see. (EX. 30 degrees to 250 degrees F) to get the best resolution at the temps I would normally see. It may not be perfect but IMO it is close enough.

Yeah.... it is 5 points. I was trying to use the AEM sensors for MAP. It wasn't good....