Turbo Inlet Duct fabrication & BOVs

RETed · 03-21-2014, 05:42 PM

Man, overkill on the hardware!

Those t-bolt clamps are kinda overkill for that section which really only sees vacuum.

Glad you're happy with it!

-Ted

Pete_89T2 · 03-21-2014, 08:35 PM

Yeah the T-bolt clamps are overkill, but wasn't too pricey. I tried re-purposing the clamps from the stock TID, but they were a tad too large in diameter to clamp down tight enough. I picked up the T-bolt clamps @ $2.60 each from siliconeintakes.com which is where I got the mandrel bent AL pipe, coupler & silicone bends.

03-21-2014, 08:35 PM	#2
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD Posts: 874 Rep Power: 16	Yeah the T-bolt clamps are overkill, but wasn't too pricey. I tried re-purposing the clamps from the stock TID, but they were a tad too large in diameter to clamp down tight enough. I picked up the T-bolt clamps @ $2.60 each from siliconeintakes.com which is where I got the mandrel bent AL pipe, coupler & silicone bends.