Tegheim - Home made 4 rotor Wolvo 142

Tegheim · 04-20-2014, 11:32 AM

Moment of truth, or point of no return for these housings...

The original "oil-nozzle" must be removed before milling or else my tool, or my housing will be broken.

Started with a M10-bolt and drilled a Ø4.2mm hole to allign the drill.
Threaded M5, and pulled it out with some washers and a M5-bolt.

Machined a Ø63mm hole for the thread, and then removed all stuff the pointed out form the housing.

All done. Next step is the inserts!

04-20-2014, 11:32 AM	#25
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Moment of truth, or point of no return for these housings... The original "oil-nozzle" must be removed before milling or else my tool, or my housing will be broken. Started with a M10-bolt and drilled a Ø4.2mm hole to allign the drill. Threaded M5, and pulled it out with some washers and a M5-bolt. Machined a Ø63mm hole for the thread, and then removed all stuff the pointed out form the housing. All done. Next step is the inserts!